SGM2588DYN5GSLASHTR中文资料圣邦股份数据手册PDF规格书

GENERAL DESCRIPTION

The SGM2588 is an integrated 100mΩ (TYP) power switch for self-powered and bus-powered Universal Series Bus (USB) applications.

The SGM2588 is internally current limited and has thermal shutdown that protects device and load from over-current damage. Thermal shutdown shuts off the output MOSFET and asserts the FAULT output if the die temperature exceeds 150℃ until the die temperature drops to 130℃.

This device employs soft-start circuit that minimizes inrush current in applications where highly capacitive loads are employed.

An open drain FAULT flag asserts low during over- current and thermal conditions after a 13ms blanking time to prevent false reporting.

SGM2588 is available in the Green SOT-23-5 package. It is rated over the -40℃ to +85℃ temperature range.

APPLICATIONS

General Purpose Power Switching

USB Bus/Self Powered Hubs/Peripherals

ACPI Power Distribution

Smart Phone & LCD TV

FEATURES

● 100mΩ (TYP) High-side N-Channel MOSFET

● Three Current Limit Levels

SGM2588A/B/G: 1100 ± 100mA

SGM2588C/D/I: 2100 ± 210mA

SGM2588E/F/K: 2600 ± 300mA

● Input Voltage Range: 2.5V to 5.5V

● Low 23μA Quiescent Current

● Typical 0.1μA Shutdown Current

● Soft-Start Function

● Thermal Shutdown Protection

● Under-Voltage Lockout Protection for VIN

● No Reversed Leakage Current (Reverse Blocking)

● Fault Flag (FAULT) with 13ms Filter Eliminates

False Assertions

● Automatic Output Discharge in Shutdown Mode

(SGM2588A/B/C/D/E/F)

● 500kΩ Pull-Down Resistor at EN Pin

(SGM2588G/I/K)

● Evaluated to IEC 60950-1, Ed 2, Am1, Annex CC,

Test Program 1 with CB Report (SGM2588A/C/E/G/I/K)

● Available in the Green SOT-23-5 Package