SGM2575A中文资料圣邦股份数据手册PDF规格书

GENERAL DESCRIPTION

The SGM2575 is a single load switch with reverse

current protection and controlled turn-on. The device

can operate from 1V to 5.5V single supply and has the

ability to drive up to 2A continuous current.

The device contains a 34mΩ low RON N-MOSFET

controlled by the ON pin. When the power supply is

turned on for the first time, a smart pull-down resistor is

used to float the ON pin until the system is stable. Once

the ON pin reaches a high voltage (> VIH), the pull-down

resistor is disconnected, then the standby current is very

low and power loss can be reduced. The small package

and low RON make the device very suitable for space

limited, battery powered applications.

The device supports a wide input voltage range, which

is suitable for many different voltage rails. The rise time

is used to avoid inrush current. The SGM2575AD/

SGM2575BD offer the quick output discharge function

in disable status.

The SGM2575 is available in a Green WLCSP-0.8×0.8-4B

package.

FEATURES

● Input Voltage Range: 1V to 5.5V

● Maximum Continuous Current: 2A

● Low On-Resistance

 RON = 34mΩ at VIN = 5V

 RON = 34mΩ at VIN = 3.3V

● Low Shutdown Current: 90nA (TYP)

● Reverse Current Protection When Disabled

● Low Threshold 1.8V GPIO Control Input

● Bidirectional Power Supply for Power Zone

Application

● Rise Time:

 SGM2575A/SGM2575AD: 60μs (TYP)

 SGM2575BD: 1600μs (TYP)

● Quick Output Discharge

(SGM2575AD/SGM2575BD Only)

● Available in a Green WLCSP-0.8×0.8-4B Package

APPLICATIONS

Mobile Phone

Ultrabook

Tablet PC

Digital Camera

Wearable Technology

Solid State Drive