SG140-05T-883B数据手册Microchip中文资料规格书

描述 Description

The SG140A/140 series of positive regulators offer self-contained, fixed-voltage capability with up to 1.5A of load current and input voltage up to 50V (SG140A series only). These units feature a unique on-chip trimming system to set the output voltages to within ±1.5% of nominal on the SG140A series and ±2.0% on the SG140 series. The SG140A versions also offer much improved line and load regulation characteristics. Utilizing an improved Bandgap reference design, problems have been eliminated that are normally associated with the Zener Diode references, such as drift in output voltage and large changes in the line and load regulation. All protective features of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a small output capacitor for satisfactory performance, ease of application is assured. Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used. Product is available in hermetically sealed TO-257 (isolated), TO-3, TO-66, and TO-39 power packages.FEATURES
• Output voltage set internally to ±1.5% on SG140A
• Input voltage reange to 50V max. on SG140A  
• Two volt input-output differential
• Bandgap reference voltage
• Excellent line and load regulation
• Foldback current limiting
• Thermal overload protection
• Voltages available - 5V, 12V, 15V
• Voltages Not Recommended For New Designs - 6V, 8V, 18V, 24V HIGH RELIABILITY FEATURES- SG140A/140
• Available to MIL-STD - 883
• Radiation data available
• LMI level \"S\" processing available