SC2542集成电路（IC）的PMIC-稳压器-DCDC开关式控制器规格书PDF中文资料

SC2542属于集成电路（IC）的PMIC-稳压器-DCDC开关式控制器。由升特制造生产的SC2542DC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。

Description

SC2542 is a high performance dual PWM controller. It is designed to convert a widely ranged battery rail down to two independent output rails. The PWM operation of the two channels are 180 degrees out of phase which can greatly reduce the size and the cost of the input capacitors. Synchronous buck PWM topology and voltage mode control allow fast transient response and flexible component selection for easy designs. A 5V standby regulator is integrated. A 10V internal linear regulator provides the bias for the controller, and this voltage is optimized for gate drivers to deliver high efficiency.

Features

◆ Independent dual-switcher-outputs

◆ Integrated 5V standby output with over 50mA capability

◆ Wide input voltage range: 6.5V ~ 28V

◆ Adjustable output voltage down to 0.75V

◆ Light load efficiency enhancement

◆ Programmable skip mode operation

◆ Flexible power sequencing with enable and power good output

◆ Synchronous buck topology with voltage mode control

◆ Out of phase operation to reduce cost of input capacitor

◆ 10V internal regulator for gate driver to deliver high efficiency

◆ Programmable switching frequency: 100KHz ~ 300KHz

◆ Full protection: UVLO, OVP, and programmable OCP

◆ No need for current sense resistor

◆ Low standby operating current (200µA typical)

◆ Low shut down current (100nA typical)

◆ 28 lead TSSOP package with exposed die pad (EDP)

◆ Fully WEEE package and RoHS Compliant

Applications

◆ Notebook computer system power

◆ Systems with 6.5V ~ 28V input

◆ Network and telecom systems

◆ Other portable devices