I2C-bus to SPI bridge

General description The SC18IS602/602B and SC18IS603 are designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. The SC18IS602/602B/603 operates as an I2C-bus sl

文件：140.1 Kbytes 页数：25 Pages

恩XP

I2C-bus to SPI bridge

The SC18IS602/602B and SC18IS603 are designed to serve as an interface between a standard I²C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I²C-bus. The SC18IS602/602B/603 operates as an I²C-bus slave-transmitter or slav I²C-bus slave interface operating up to 400 kHz\nSPI master operating up to 1.8 Mbit/s (SC18IS602/602B) or 4 Mbit/s (SC18IS603)\n200-byte data buffer\nUp to four slave select outputs\nUp to four programmable I/O pins\nOperating supply voltage: 2.4 V to 3.6 V\nLow power mode\nInternal oscillator opti;

恩XP

恩智浦

Semtech(升特)
MLP-10

Semtech(升特)

上传：深圳市天芯威科技有限公司

Semtech(升特)
MLPD-8

Semtech(升特)

上传：深圳市天芯威科技有限公司

SEMTECH
MLPD-10

SEMTECH

先之科

上传：深圳市旺财半导体有限公司