1.8 V single UART, 20 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface

General description The SC16C850SV is a 1.8 V, low power single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 20

文件：987.89 Kbytes 页数：48 Pages

恩XP

1.8 V single UART, 20 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface

文件：228.59 Kbytes 页数：46 Pages

恩XP

1.8 V的单通道UART，20 Mbit/s(最快)，带有128字节FIFO、红外(IrDA)以及XScale VLIO总线接口

The SC16C850SV is a 1.8 V, low power single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 20 Mbit/s (4× sampling rate) Single channel high performance UART\n1.8 V operation\nAdvanced package: HVQFN32\nUp to 20 Mbit/s data rate at 1.8 V\nProgrammable sampling rates: 16×, 8×, 4×\n128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU\n128-byte receive FIFO with error flags to reduce the bandwid;

恩XP

恩智浦

UART with 128-byte FIFO?셲 FIFO Counters and Half-duplex Control

GENERAL DESCRIPTION The XR16C850*1 (850) is a universal asynchronous receiver and transmitter (UART) and is pin compatible with the ST16C550,ST16C650A, and TI’s TL16C750 UART. The 850 is an enhanced UART with 128 byte FIFOs, automatic hardware/software flow control, and data rates up to 1.5Mbps

文件：331.36 Kbytes 页数：55 Pages

EXAR

艾科嘉