SC16C652B_V01中文资料恩XP数据手册PDF规格书

General description

The SC16C652B is a 2 channel Universal Asynchronous Receiver and Transmitter

(UART) used for serial data communications. Its principal function is to convert parallel

data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s.

The SC16C652B is pin compatible with the SC16C2550. It will power-up to be functionally

equivalent to the 16C2450. The SC16C652B provides enhanced UART functions with

32-byte FIFOs, modem control interface, DMA mode data transfer, and IrDA

encoder/decoder. The DMA mode data transfer is controlled by the FIFO trigger levels

and the TXRDY and RXRDY signals. On-board status registers provide the user with error

indications and operational status. System interrupts and modem control features may be

tailored by software to meet specific user requirements. An internal loop-back capability

allows on-board diagnostics. Independent programmable baud rate generators are

provided to select transmit and receive baud rates.

The SC16C652B operates at 5 V, 3.3 V and 2.5 V and the industrial temperature range,

and is available in plastic LQFP48 and very small (Micro-UART) HVQFN32 packages.

特性 Features

- 2 channel UART

- 5 V, 3.3 V and 2.5 V operation

- 5 V tolerant inputs

- Industrial temperature range (-40 °C to +85 °C)

- Pin and functionally compatible to 16C2450 in LQFP48 package, and software

compatible with industry standard 16C450, 16C550, and SC16C650

- Up to 5 Mbit/s data rate at 5 V and 3.3 V, and 3 Mbit/s at 2.5 V

- 32-byte transmit FIFO to reduce the bandwidth requirement of the external CPU

- 32-byte receive FIFO with error flags to reduce the bandwidth requirement of the

external CPU

- Independent transmit and receive UART control

- Four selectable Receive and Transmit FIFO interrupt trigger levels

- Automatic software (Xon/Xoff) and hardware (RTS/CTS) flow control

- Programmable Xon/Xoff characters

- Software selectable baud rate generator

- Standard modem interface or infrared IrDA encoder/decoder interface

- Supports IrDA version 1.0 (up to 115.2 kbit/s)

- Sleep mode

- Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun Break)

- Transmit, Receive, Line Status, and Data Set interrupts independently controlled

- Fully programmable character formatting:

- 5-bit, 6-bit, 7-bit, or 8-bit characters

- Even, odd, or no-parity formats

- 1, 11¤2, or 2-stop bit

- Baud generation (DC to 5 Mbit/s)

- False start-bit detection

- Complete status reporting capabilities

- 3-state output TTL drive capabilities for bi-directional data bus and control bus

- Line break generation and detection

- Internal diagnostic capabilities:

- Loop-back controls for communications link fault isolation

- Prioritized interrupt system controls

- Modem control functions (CTS, RTS, DSR, DTR, RI, CD)