5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs and infrared (IrDA) encoder/decoder

文件：881.81 Kbytes 页数：51 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs and infrared (IrDA) encoder/decoder

文件：251.98 Kbytes 页数：48 Pages

恩XP

5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs and infrared (IrDA) encoder/decoder

The SC16C650B is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.\nThe SC16C650B is pin compatible with the ST16C650 Single channel\n5 V, 3.3 V and 2.5 V operation\n5 V tolerant on input only pins1\nIndustrial temperature range (-40 Cel to +85 Cel)\nAfter reset, all registers are identical to the typical 16C450 register set\nCapable of running with all existing generic 16C450 software\nPin compatibility with the i;

恩XP

恩智浦

2.90V TO 5.5V UART WITH 32-BYTE FIFO

GENERAL DESCRIPTION The ST16C650A1 (650A) is a 2.90 to 5.5 volt Universal Asynchronous Receiver and Transmitter (UART) with 5 volt tolerant inputs. This device supports Intel and PC ISA mode data bus interfaces and is software compatible to industry standard 16C450, 16C550, ST16C580 and ST16C650A

文件：666.95 Kbytes 页数：53 Pages

EXAR

艾科嘉

2.90V TO 5.5V UART WITH 32-BYTE FIFO

文件：1.16935 Mbytes 页数：52 Pages

EXAR

艾科嘉

2.90V TO 5.5V UART WITH 32-BYTE FIFO

文件：1.12634 Mbytes 页数：52 Pages

EXAR

艾科嘉