SC16C550BIB48中文资料5 V, 3.3 V and 2.5 V UART with 16-byte FIFOs数据手册恩XP规格书

描述 Description

The SC16C550B is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.
The SC16C550B is pin compatible with the ST16C550, TL16C550 and PC16C550, and it will power-up to be functionally equivalent to the 16C450. The SC16C550B also provides DMA mode data transfers through FIFO trigger levels and the TXRDY and RXRDYsignals (TXRDY and RXRDY are not supported in the HVQFN32 package). On-board status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.
The SC16C550B operates at 5 V, 3.3 V and 2.5 V, and the Industrial temperature range, and is available in plastic HVQFN32, DIP40, PLCC44 and LQFP48 packages.

特性 Features

5 V, 3.3 V and 2.5 V operation
Industrial temperature range
After reset, all registers are identical to the typical 16C450 register set
Capable of running with all existing generic 16C450 software
Pin compatibility with the industry-standard ST16C450/550, TL16C450/550, PC16C450/550
Up to 3 Mbit/s transmit/receive operation at 5 V, 2 Mbit/s at 3.3 V, and 1 Mbit/s at 2.5 V
5 V tolerant on input only pins
16 byte transmit FIFO
16 byte receive FIFO with error flags
Programmable auto-RTS and auto-CTSIn auto-CTS mode, CTS controls transmitter
In auto-RTS mode, RX FIFO contents and threshold control RTS
Automatic hardware flow control
Software selectable baud rate generator
Four selectable Receive FIFO interrupt trigger levels
Standard modem interface
Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun Break)
Independent receiver clock input
Transmit, Receive, Line Status, and Data Set interrupts independently controlled
Fully programmable character formatting: 5, 6, 7, or 8-bit characters
Even, odd, or no-parity formats
1, 1 1/2, or 2-stop bit
Baud generation (up to 3 Mbit/s)
False start-bit detection
Complete status reporting capabilities
3-state output TTL drive capabilities for bidirectional data bus and control bus
Line break generation and detection
Internal diagnostic capabilities: Loopback controls for communications link fault isolation
Prioritized interrupt system controls
Modem control functions (CTS, RI, DCD, DSR, DTR, RTS)