SAK-TC1767-256F133HL中文资料32-Bit Single-Chip Microcontroller数据手册Infineon规格书

描述 Description

Introduction
This Data Sheet describes the Infineon TC1767, a 32-bit microcontroller DSP, based on the Infineon TriCore Architecture.Summary of

特性 Features

• High-performance 32-bit super-scalar TriCore V1.3.1 CPU with 4-stage pipeline
– Superior real-time performance
– Strong bit handling
– Fully integrated DSP capabilities
– Single precision Floating Point Unit (FPU)
– 133 MHz operation at full temperature range
• 32-bit Peripheral Control Processor with single cycle instruction (PCP2)
– 8 Kbyte Parameter Memory (PRAM)
– 16 Kbyte Code Memory (CMEM)
– 133 MHz operation at full temperature range
• Multiple on-chip memories
– 72 Kbyte Data Memory (LDRAM)
– 24 Kbyte Code Scratchpad Memory (SPRAM)
– 2 Mbyte Program Flash Memory (PFlash)
– 64 Kbyte Data Flash Memory (DFlash, represents 16 Kbyte EEPROM)
– Instruction Cache: up to 8 Kbyte (ICACHE, configurable)
– Data Cache: up to 4 Kbyte (DCACHE, configurable)
– 8 Kbyte Overlay Memory (OVRAM)
– 16 Kbyte BootROM (BROM)
• 8-Channel DMA Controller
• Sophisticated interrupt system with 2×255 hardware priorityarbitration levels serviced by CPU or PCP2
• High performing on-chip bus structure
– 64-bit Local Memory Buses between CPU, Flash and Data Memory
– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units
– One bus bridge (LFI Bridge)
• Versatile On-chip Peripheral Units
– Two Asynchronous/Synchronous Serial Channels (ASC) with baud rate generator, parity, framing and overrun error detection
– Two High-Speed Synchronous Serial Channels (SSC) with programmable data length and shift direction
– One serial Micro Second Bus interface (MSC) for serialport expansion to external power devices
– One High-Speed Micro Link interface  (MLI) for serial inter-processor communication
– One MultiCAN Module with 2 CAN nodes and 64 free assignable message objects for high efficiency data handling via FIFO buffering and gateway data transfer
– One General Purpose Timer Array Modules (GPTA) with additional Local Timer Cell Array (LTCA2) providing a powerful set of digital signal filtering and timer functionality to realize autonomous and complex Input/Output management
• 32 analog inputlines for ADC
– 2 independent kernels (ADC0, ADC1)
– Analog supply voltage range from 3.3 V to 5 V (single supply)
– Performance for 12 bit resolution (@fADCI =10 MHz)
• 4 different FADC input channels
• Extreme fast conversion, 21 cycles of fFADC clock (262.5 ns @ fFADC = 80 MHz)
– 10-bit A/D conversion (higher resolution  can be achieved by averaging of consecutive conversions in digital data reduction filter)
• 88 digital general purpose I/Olines (GPIO), 4 input lines
• Digital I/O ports with 3.3 V capability
• On-chip debug support for OCDS Level 1 (CPU, PCP, DMA, On Chip Bus)
• Dedicated Emulation Device chip available (TC1767ED)
– multi-core debugging, real time tracing, and calibration
– four/five wire JTAG(IEEE 1149.1) or two wire DAP (Device Access Port) interface
• Power Management System
• Clock Generation Unit with PLL
• Core supply voltage of 1.5 V
• I/O voltage of 3.3 V
• Full automotive temperature range: -40° to +125°C
• Package variant: PG-LQFP-176-5