SAF-C515C-8EM中文资料英飞凌数据手册PDF规格书

8-Bit Single-Chip Microcontroller

The C515C is an enhanced, upgraded version of the SAB 80C515A 8-bit microcontroller which additionally provides a full CAN interface, a SPI compatible synchronous serial interface, extended power save provisions, additional on-chip RAM, 64K of on-chip program memory, two new external interrupts and RFI related improvements. With a maximum external clock rate of 10 MHz it achieves a 600 ns instruction cycle time (1 µs at 6 MHz).

特性 Features

• Full upward compatibility with SAB 80C515A

• On-chip program memory (with optional memory protection)

– C515C-8R 64 Kbytes on-chip ROM

– C515C-8E 64 Kbytes on-chip OTP

– alternatively up to 64 Kbytes external program memory

• 256 bytes on-chip RAM

• 2 Kbytes of on-chip XRAM

• Up to 64 Kbytes external data memory

• Superset of the 8051 architecture with 8 datapointers

• Up to 10 MHz external operating frequency (1 µs instruction cycle time at 6 MHz

external clock)

• On-chip emulation support logic (Enhanced Hooks Technology)

• Current optimized oscillator circuit and EMI optimized design

• Eight ports: 48 + 1 digital I/O lines, 8 analog inputs

– Quasi-bidirectional port structure (8051 compatible)

– Port 5 selectable for bidirectional port structure (CMOS voltage levels)

• Full-CAN controller on-chip

– 256 register/data bytes are located in external data memory area

– max. 1 MBaud at 8 - 10 MHz operating frequency

• Three 16-bit timer/counters

– Timer 2 can be used for compare/capture functions

• 10-bit A/D converter with multiplexed inputs and built-in self calibration

• Full duplex serial interface with programmable baudrate generator (USART)

• SSC synchronous serial interface (SPI compatible)

– Master and slave capable

– Programmable clock polarity/clock-edge to data phase relation

– LSB/MSB first selectable

– 2.5 MHz transfer rate at 10 MHz operating frequency

• Seventeen interrupt vectors, at four priority levels selectable

• Extended watchdog facilities

– 15-bit programmable watchdog timer

– Oscillator watchdog

• Power saving modes

– Slow-down mode

– Idle mode (can be combined with slow-down mode)

– Software power-down mode with wake-up capability through INT0 or RXDC pin

– Hardware power-down mode

• CPU running condition output pin

• ALE can be switched off

• Multiple separate VDD/VSS pin pairs

• P-MQFP-80-1 package

• Temperature Ranges:

SAB-C515C versions: TA = 0 to 70 °C

SAF-C515C versions: TA = -40 to 85 °C

SAH-C515C versions: TA = -40 to 110 °C