SAF-C167CR-16F中文资料西门子数据手册PDF规格书

Introduction

The C167CR-16F is a new derivative of the Siemens C16x Family of full featured single-chip CMOS microcontrollers. It combines high CPU performance (up to 10 million instructions per second) with high peripheral functionality and enhanced IO-capabilities. It also provides on-chip high-speed RAM, on-chip Flash memory and clock generation via PLL.

C167CR-16F 16-Bit Microcontroller

● High Performance 16-bit CPU with 4-Stage Pipeline

● 100 ns Instruction Cycle Time at 20 MHz CPU Clock

● 500 ns Multiplication (16 × 16 bit), 1 µs Division (32 / 16 bit)

● Enhanced Boolean Bit Manipulation Facilities

● Additional Instructions to Support HLL and Operating Systems

● Register-Based Design with Multiple Variable Register Banks

● Single-Cycle Context Switching Support

● Clock Generation via on-chip PLL or via direct clock input

● Up to 16 MByte Linear Address Space for Code and Data

● 2 KByte On-Chip Internal RAM (IRAM)

● 2 KByte On-Chip Extension RAM (XRAM)

● 128 KByte On-Chip Flash EPROM with Bank Erase Feature and Read Protection

● Dedicated Flash Control Register with Operation Lock Mechanism

● 12 V External Flash Programming Voltage

● Flash Program Verify and Erase Verify Modes with 1000 Program/Erase Cycles

● Programmable External Bus Characteristics for Different Address Ranges

● 8-Bit or 16-Bit External Data Bus

● Multiplexed or Demultiplexed Address/Data Buses with 5 Programmable Chip-Select Signals

● Hold- and Hold-Acknowledge Bus Arbitration Support

● 1024 Bytes On-Chip Special Function Register Area

● Idle and Power Down Modes

● 8-Channel Interrupt-Driven Single-Cycle Data Transfer via Peripheral Event Controller (PEC)

● 16-Priority-Level Interrupt System with 56 Sources, Sample-Rate down to 50 ns

● 16-Channel 10-bit A/D Converter with 9.7µs Conversion Time

● Two 16-Channel Capture/Compare Units and one 4-Channel PWM Unit

● Two Multi-Functional General Purpose Timer Units with 5 Timers

● Two Serial Channels (Synchronous/Asynchronous and High-Speed-Synchronous)

● On-Chip CAN Interface with 15 Message Objects (Full-CAN/Basic-CAN)

● Programmable Watchdog Timer

● Up to 111 General Purpose I/O Lines, partly with Selectable Input Thresholds and Hysteresis

● Supported by a Wealth of Development Tools like C-Compilers, Macro-Assembler Packages, Emulators, Evaluation Boards, HLL-Debuggers, Simulators, Logic Analyzer Disassemblers, Programming Boards

● On-Chip Bootstrap Loader

● 144-Pin MQFP Package (EIAJ)