SAB80C517A-N18-T3中文资料西门子数据手册PDF规格书

High-Performanc 8-Bit CMOS Single-Chip Microcontroller

The SAB 80C517A/83C517A-5 is a high-end member of the Siemens SAB 8051 family of

microcontrollers. It is designed in Siemens ACMOS technology and based on SAB 8051 architecture. ACMOS is a technology which combines high-speed and density characteristics with low-power consumption or dissipation.

SAB 80C517A/83C517A-5, up to 18 MHz operation

32 K×8 ROM (SAB 83C517A-5 only, ROM-Protection available)

256 ×8 on-chip RAM

2 K ×8 on-chip RAM (XRAM)

Superset of SAB 80C51 architecture:

– 1µs instruction cycle time at 12 MHz

– 666 ns instruction cycle time at 18 MHz

– 256 directly addressable bits

– Boolean processor

– 64 Kbyte external data and

program memory addressing

Four 16-bit timer/counters

Powerful 16-bit compare/capture unit (CCU) with up to 21 high-speed or PWM output channels and 5 capture inputs

Versatile fail-safe provisions

Fast 32-bit division, 16-bit multiplication,

32-bit normalize and shift by peripheral MUL/DIV unit (MDU)

Eight data pointers for external memory addressing

Seventeen interrupt vectors, four priority levels selectable

Genuine 10-bit A/D converter with 12 multiplexed inputs

Two full duplex serial interfaces with programmable Baudrate-Generators

Fully upward compatible with SAB 80C515, SAB 80C517, SAB 80C515A

Extended power saving mode

Fast Power-On Reset

Nine ports: 56 I/O lines, 12 input lines

Three temperature ranges available: 0 to 70 oC (T1)

– 40 to 85oC (T3)

– 40 to 110oC (T4)

Plastic packages: P-LCC-84, P-MQFP-100-2