SAA7114E中文资料PAL/NTSC/SECAM video decoder with adaptive PAL/NTSC comb filter, VBI data slicer and high performance scaler数据手册恩XP规格书

描述 Description

GENERAL DESCRIPTION
The SAA7114 is a video capture device for applications at the image port of VGA controllers.FEATURES
1.1 Video decoder
• Six analog inputs, internal analog source selectors, e.g.
  6×CVBS or (2×Y/C and 2×CVBS) or (1×Y/C and 4×CVBS)
• Two analog preprocessing channels in differential CMOS style inclusive built-in analog anti-alias filters
• Fully programmable static gain or Automatic Gain Control (AGC) for the selected CVBS or Y/C channel
• Automatic Clamp Control (ACC) for CVBS, Y and C
• Switchable white peak control
• Two 9-bit video CMOS Analog-to-Digital Converters (ADCs), digitized CVBS or Y/C signals are available on the expansion port
• On-chip line-locked clock generation in accordance with “ITU 601”
• Digital PLL for synchronization and clock generation from all standards and non-standard video sources e.g. consumer grade VTR
• Requires only one crystal (32.11 or 24.576 MHz) for all standards
• Horizontal and vertical sync detection
• Automatic detection of 50 and 60 Hz field frequency, and automatic switching between PAL and NTSC standards
• Luminance and chrominance signal processing for PAL B, G, D, H, I and N, combination PAL N, PAL M, NTSC M, NTSC-Japan, NTSC 4.43 and SECAM
• Adaptive 2/4-line comb filter for two dimensional chrominance/luminance separation:
– Increased luminance and chrominance bandwidth for all PAL and NTSC standards
– Reduced cross colour and cross luminance artefacts
• PAL delay line for correcting PAL phase errors
• Independent Brightness Contrast Saturation (BCS) adjustment for decoder part
• User programmable sharpness control
• Independent gain and offset adjustment for raw data path.1.2 Video scaler
• Horizontal and vertical downscaling and upscaling to randomly sized windows
• Horizontal and vertical scaling range: variable zoom to 1⁄64(icon) (it should be noted that the H and V zoom are restricted by the transfer data rates)
• Anti-alias and accumulating filter for horizontal scaling
• Vertical scaling with linear phase interpolation and accumulating filter for anti-aliasing (6-bit phase
accuracy)
• Horizontal phase correct up and downscaling for improved signal quality of scaled data, especially for compression and video phone applications, with 6-bit phase accuracy (1.2 ns step width)
• Two independent programming sets for scaler part, to define two ‘ranges’ per field or sequences over frames
• Fieldwise switching between decoder part and expansion port (X port) input
• Brightness, contrast and saturation controls for scaled outputs.APPLICATIONS
• Desktop video
• Multimedia
• Digital television
• Image processing
• Video phone applications.

特性 Features

1.1 Video decoder
• Six analog inputs, internal analog source selectors, e.g.
  6×CVBS or (2×Y/C and 2×CVBS) or (1×Y/C and 4×CVBS)
• Two analog preprocessing channels in differential CMOS style inclusive built-in analog anti-alias filters
• Fully programmable static gain or Automatic Gain Control (AGC) for the selected CVBS or Y/C channel
• Automatic Clamp Control (ACC) for CVBS, Y and C
• Switchable white peak control
• Two 9-bit video CMOS Analog-to-Digital Converters (ADCs), digitized CVBS or Y/C signals are available on the expansion port
• On-chip line-locked clock generation in accordance with “ITU 601”
• Digital PLL for synchronization and clock generation from all standards and non-standard video sources e.g. consumer grade VTR
• Requires only one crystal (32.11 or 24.576 MHz) for all standards
• Horizontal and vertical sync detection
• Automatic detection of 50 and 60 Hz field frequency, and automatic switching between PAL and NTSC standards
• Luminance and chrominance signal processing for PAL B, G, D, H, I and N, combination PAL N, PAL M, NTSC M, NTSC-Japan, NTSC 4.43 and SECAM
• Adaptive 2/4-line comb filter for two dimensional chrominance/luminance separation:
– Increased luminance and chrominance bandwidth for all PAL and NTSC standards
– Reduced cross colour and cross luminance artefacts
• PAL delay line for correcting PAL phase errors
• Independent Brightness Contrast Saturation (BCS) adjustment for decoder part
• User programmable sharpness control
• Independent gain and offset adjustment for raw data path.1.2 Video scaler
• Horizontal and vertical downscaling and upscaling to randomly sized windows
• Horizontal and vertical scaling range: variable zoom to 1⁄64(icon) (it should be noted that the H and V zoom are restricted by the transfer data rates)
• Anti-alias and accumulating filter for horizontal scaling
• Vertical scaling with linear phase interpolation and accumulating filter for anti-aliasing (6-bit phase
accuracy)
• Horizontal phase correct up and downscaling for improved signal quality of scaled data, especially for compression and video phone applications, with 6-bit phase accuracy (1.2 ns step width)
• Two independent programming sets for scaler part, to define two ‘ranges’ per field or sequences over frames
• Fieldwise switching between decoder part and expansion port (X port) input
• Brightness, contrast and saturation controls for scaled outputs.