SA57AHU数据手册APEX中文资料规格书

描述 Description

The SA57 is a low cost, 60V, pulse width modulation (PWM) motor driver IC capable of delivering up to 17A of output current. As a monolithic, single package solution, the SA57 provides a high level of integration for driving brush-type DC motors in the market space between lower current devices and higher cost drivers operating on 400+ voltage supplies. A seamless digital interface is possible with the SA57AHU by partnering with either a MCU or DSP. Individual control of both the top side and the bottom side output FETs is allowed via direct signals from the processor.

Thermal and short circuit monitoring for the SA57 is provided, which generates fault signals for the microcontroller to take appropriate action. Additionally, cycle-by-cycle current limit offers user programmable hardware protection independent of the microcontroller. Output current is measured using an innovative low loss technique.

Housed in a 44-pin HSOP package with integrated heat slug, the SA57 provides balance between excellent thermal performance with the advantages of a low profile surface mount package.

特性 Features

•Voltage supply operation – 8.5V to 60V
•High output current – 8A continuous, 15A PEAK phase
•Low cost intelligent switching amplifier
•Directly connects to most embedded microcontrollers and digital signal controllers
•Integrated gate driver logic with dead-time generation and shoot-through prevention
•User programmable cycle-by-cycle current limit protection
•Over current and over temperature warning signals

应用 Application

• Imaging and Camera Control
• Robotics
• Flight Control Actuator