QT10GU-AX

Baseband Chip DBDC, WiFi 6, 4x4 in 2.4 GHz and 8x8 in 5 GHz; • Dual-Band Dual-Concurrent Modem- ViSiON Cloud managed- Up to 8x8 5 GHz + 4x4 2.4 GHz\n• World's First 8X8 WiFi 6 Solution\n• 5 GHz Modem- Industry’s Highest Performance 802.11ax/ac/n/a/g/b WiFi 6 DBDC Baseband Chip- Up to 8 Streams in 8x8 MIMO Configuration\n• 2.4 GHz Modem- Support for 802.11ax/n/g/b- Up to 4 Streams in 4x4 MIMO Configuration\n• Embedded Processors- DSP Processors- Support for Minimum Burden on the Host CPU\n• Hardware Datapath- Layer 2/3 Switching Supported, Including Full HW VLAN Support- Layer 3 Stream Identification\n;

The QT10GU-AX is a dual−band dual concurrent WiFi 6 baseband chip that supports the 802.11ax/ac/n/a/g/b standards. QT10GU-AX will be the first chip in the industry to support the 8x8 with 8 streams and MU-MIMO. \n\nMulti-User MIMO (MU-MIMO) provides an alternative use of the spatial multiplexing that is provided by MIMO. MIMO enables the transmission of multiple independent streams between a transmitter and a receiver with multiple antennas. However, without MU-MIMO, the spatial multiplexing gain is limited by the number of antennas at the client devices (typically one or two), leaving a lot of spatial diversity unused. MU-MIMO extends the MIMO concept to the case with one transmitter and multiple receivers (Downlink MU-MIMO) or to the case with one receiver and multiple transmitters (Uplink MU-MIMO), allowing the full use of the spatial diversity provided by the channel.

QT2025PRKDB

AMCC
BGA