QN9080-001-M17

Fully Certified Module Supporting Bluetooth and NFC; Bluetooth Low Energy Radio Features\n• -92.7 dB RX sensitivity.\n• -20 dBm to +2 dBm TX output power.\n• LE 2M PHY with Bluetooth 5 qualified Supports up to 16 simultaneous links.\nNTAG Features\n• ISO/IEC 14443 Part 2 and 3 compliant\n• NTAG I2C plus development board is certified as NFC Forum Type 2 Tag\n• (Certification ID: 58514)\nCore and Memories\n• 32 MHz Cortex–M4F core 512KB flash memory 128 KB SRAM\n• 32 MHz Fusion Sensor Processor (FSP)\n• 512 KB flash, 128 KB RAM\nLow Power Consumption and Operating Volatage Rangers\n• 3.5 mA TX current @ 0dBm Tx power\n• 4.0 mA RX current\n • Operating voltage: 1.67 to 3.6V\nDigital and Analog Peripherals\n• UART/SPI/I2C up to 2, 1 USB 2.0 full speed\n• 8 ch 16-bit Σ△ADC, 8 bit DAC with 1Msps, 2 ultra-low power comparators\n• 4 x general purpose timer, SCT/PWM\n• 8 ch capacitive touch\n• Quad-SPI for XIP\n• Temperature sensor\nEasy of Design\n• Integrated 32 MHz and 32.768 kHz crystals\n• Integrated 2.4 GHz antenna\n• Fully FCC/CE/IC/MIC certified.\n;

The QN9080-001-M17 is a fully certified module supporting Bluetooth® 5 and NFC. It has ultra-low power consumption, highly integrated with rich feature sets, fully FCC/CE/IC/MIC certified.\nThe module is based on the QN9080 Bluetooth MCU powered by an Arm® Cortex®-M4F and integrates a dedicated fusion sensor co-processor (FSP). The 512 KB onboard flash and 128 KB SRAM provide enough room and flexibility for complex applications and the connectivity stacks. \nIt also integrates NFC NTAG, 32 MHz & 32 kHz Crystals, RF matching, and 2.4 GHz antenna, offering a complete and ready-to-use solution for applications requiring Bluetooth Low Energy wireless connectivity and simple pairing with NFC NTAG.\n

恩XP

QN9080-001-M17

Ultra Low-Power Bluetooth Smart 5.0 SIP

ETC

QP7C198-25DMB

E2V
最新

E2V

QP7C198-25LMB

E2V
最新

E2V

QP7C198-25LMB

E2V
LCC-32

E2V