PV4210数据手册ROHM中文资料规格书

描述 Description

The PV4210 is a single output, dual or single phase digital synchronous buck controller with adaptive loop compensation for point-of-load (POL) and DDR memory VR applications. PV42010 uses ROHM’s Powervation digital controller technology, Auto-Control®. This proprietary adaptive auto-tuning technology uses advanced loop compensation algorithms to implement cycle-by-cycle adaptive autonomous auto-tuning, while supporting bounded auto-tuning ranges to maximize transient performance, and allows a user selectable fixed compensation mode. When used in dual phase mode, phases may be automatically added/removed as the load varies, so that efficiency is maximized over the load range. In addition to the transient benefits brought by Auto-Control, PV4210 implements ROHM’s new Volt-Sec Boost™ (VSB™) transient suppression technology and a digitally programmable load-line. The PV4210 complies with the Serial VID (SVID) portion of Intel’s VR13 specification in order to support Intel-based memory, low-power CPU rails, and similar applications. Through SVID, the CPU can dynamically control the output voltage, slew rates, power states, as well as monitor the VR controller for telemetry purposes. In parallel to SVID, the PV4210 also supports a set of PMBus commands. PV4210 builds in a new, flexible PWM behavior system that provides two modes of operation to support driver & DrMOS compatibility. Additionally, to maximize system performance and reliability, the IC provides temperature correction/compensation of several parameters. PV4210 is a fully protected DC/DC solution that utilizes analog and digital functionality to maximize system protection.

特性 Features

• Auto-Control Real-Time Adaptive Loop Compensation
• Compliant to Intel® VR13 SVID Protocol
- Backwards Compatible to VR12.5
• Compliant to Intel VR13 DC/DC Converter Specification Including Digital Input Power Monitor
• Digitally Programmable Load-Line Slope & Offset
• SMBus Interface with PMBus™ Compliant Communication
• CONFIG and NVM Programming Supports Non-SMBus Applications
• Precision Measurement & Telemetry Reporting: VOUT, IOUT, VIN, IIN, PIN, Temperature, Duty Cycle
• 3.3 V or 5 V Bias Compatible
• Programmable Protection & Warning
- Output OVP, OCP, SCP, LOS
- Input UVLO, OVLO
- Internal & External OTP
- Temperature Compensated Faults
- Programmable Latching & Auto-Restart
• Single-Pin Configuration with up to 23 Profile Tables
• Power Management and Conversion
- VOUT Range: 0 V & 0.25 V to 3.04 V
- ±0.5% VOUT, ±1.5% VIN, & ±3% IOUT Accuracy Over Temperature
- Automatic, Configurable Phase Add/Drop
- Improved transient response
o VSB™ (Volt-Second Boost™) for Reduced Overshoot
o Fast Phase Add
- Programmable Switching Frequency
o 375 kHz to 1 MHz (1ɸ)
o 375 kHz to 500kHz (2ɸ)
- Programmable VOUT
- Frequency Synchronization & Phase Alignment
- High light-load efficiency
o Constant ON-time mode
o Zero-cross detection
- Programmable Precision Duty Cycle Limit
- Supports DCR & SenseFET ISENSE Options
o Programmable Gain, Attenuation, & Offset
- Internal & External TSENSE
o Programmable Gain & Offset for External Sense Elements
• Internal Anti-Fuse Based NVM
- -40°C to 125°C (20 year data retention rating)
• 32-Lead 5 mm x 5 mm QFN package (RoHS/PbF)