PTH12060LAS.B中文资料德州仪器数据手册PDF规格书

1FEATURES

2· Up to 10-A Output Current

· 12-V Input Voltage

· Wide-Output Voltage Adjust

(1.2 V to 5.5 V/(0.8 V to 1.8 V)

· Efficiencies up to 95%

· 225 W/in3 Power Density

· Output Voltage Sense

· Margin Up/Down Controls

· Undervoltage Lockout

· Auto-Track™ Sequencing

· Pre-Bias Start-up Capability

using On/Off Inhibit

· Output Overcurrent Protection

(Non-latching, Auto-Reset)

· Operating Temperature: –40°C to 85°C

· Safety Agency Approvals:

UL/IEC/CSA C22.2 60950-1

· Point-of-Load Alliance (POLA™) Compatible

APPLICATIONS

· Complex Digital Systems

DESCRIPTION

The PTH12060 series is a non-isolated power module, and part of a new class of complete dc/dc converters

from Texas Instruments. These modules are small in size, and are an alternative for applications requiring up to

10 A of load current.

The small footprint, (1 inch × 0.62 inch) and industry leading features makes this module suitable for space

conscious digital systems that incorporate multiple processors.

This series of modules operate from a 12-V input bus voltage to provide step-down power conversion to a wide

range of output voltages. The output voltage of the W-suffix device may be set to any voltage over the adjust

range, 1.2 V to 5.5 V. The L-suffix device has an adjustment range of 0.8 V to 1.8 V. The output voltage is set

within the adjust range using a single external resistor.

This product includes Auto-Track™ Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a

power system, by enabling modules to track each other, or any other external voltage, during power up and

power down.

Other features include an on/off inhibit and margin up/down controls. An output voltage sense ensures tight load

regulation. Non-latching overcurrent trip protects against load faults.

For start-up into a non-prebiased output, review page 14 in the Application Information section.

For start-up into a prebiased output, review page 18 in the Application Information section.