PTH12010LAS.B中文资料德州仪器数据手册PDF规格书

FEATURES

· Up to 12-A Output Current

· 12-V Input Voltage

· Wide-Output Voltage Adjust

(1.2 V to 5.5 V)/(0.8 V to 1.8 V)

· Efficiencies up to 94%

· 200 W/in3 Power Density

· On/Off Inhibit

· Output Voltage Sense

· Prebias Startup

· Undervoltage Lockout

· Auto-Track™ Sequencing

· Margin Up/Down Controls

· Output Overcurrent Protection

(Nonlatching, Auto-Reset)

· Operating Temperature: –40°C to 85°C

· Safety Agency Approvals:

UL/IEC/CSA-22.2 60950-1

· Point of Load Alliance (POLA™) Compatible

APPLICATIONS

· Complex Multivoltage, Multiprocessor

Systems

DESCRIPTION

The PTH12010 series of non-isolated power modules that are small in size but big on performance and

flexibility. The high output current, compact footprint, and industry-leading features offers system designers a

versatile module for powering complex multi-processor digital systems.

The series employs double-sided surface mount construction and provides high-performance step-down power

conversion for up to 12 A of output current. The output voltage of the W-suffix parts can be set to any value over

the range, 1.2 V to 5.5 V. The L-suffix devices have an adjustment range of 0.8 V to 1.8 V. The output voltage is

set using a single external resistor.

This series includes Auto-Track™ sequencing. Auto-Track simplifies the task of supply voltage sequencing in a

power system by enabling modules to track each other, or any external voltage, during power up and power

down.

Other operating features include an on/off inhibit, output voltage adjust (trim), margin up/down controls, and the

ability to start up into an existing output voltage or prebias. For improved load regulation, an output voltage

sense is also provided. A nonlatching overcurrent trip serves as load fault protection.

Target applications include complex multivoltage, multiprocessor systems that incorporate the industry’s

high-speed TMS320™ DSP family, microprocessors, and bus drivers.

For start-up into a non-prebiased output, review page 14 in the Application Information section.

For start-up into a prebiased output, review page 18 in the Application Information section.