PTH05000WAZT电源-板安装的直流转换器规格书PDF中文资料

PTH05000WAZT属于电源-板安装的直流转换器。由德州仪器制造生产的PTH05000WAZT直流转换器一种旨在将直流电压输入电平改变为一个或多个不同的直流电压输出电平的装置。

特性 Features

• Up to 6-A Output Current

• 5-V Input Voltage

• Wide-Output Voltage Adjust

(0.9 V to 3.6 V)

• Efficiencies up to 94 %

• 160 W/in³ Power Density

• On/Off Inhibit

• Under-Voltage Lockout

• Output Current Limit

• Pre-Bias Startup Capability

• Over-Temperature Protection

• Surface Mountable

• Operating Temp: –40 to +85 °C

• Safety Agency Approvals (Pending):

UL 1950, CSA 22.2 950, EN60950

& VDE

描述 Description

The PTH05000 series of non-isolated

power modules are small in size and high

on performance. Using double-sided surface

mount construction and synchronous

rectification technology, these regulators

deliver up to 6 A of output current while

occupying a PCB area of about half the

size of a standard postage stamp. They

are an ideal choice for applications where

space, performance and cost are important

design constraints.

The series operates from an input

voltage of 5 V to provide step-down

power conversion to any output voltage

over the range, 0.9 V to 3.6 V. The output

voltage of the PTH05000W is set

within this range using a single resistor.

Operating features include an on/off

inhibit, output voltage adjust (trim), an

output current limit, and over-temperature

protection.

For high efficiency these parts employ

a synchronous rectifier output stage. An

output pre-bias holdoff capability ensures

that the output will not sink current during

startup.

Target applications include telecom,

industrial, and general purpose circuits,

including low-power dual-voltage systems

that use a DSP, microprocessor, or ASIC.

Package options include both throughhole

and surface mount configurations.