PTH03010WAZT电源-板安装的直流转换器规格书PDF中文资料

特性 Features

• Up to 15-A Output Current

• 3.3-V Input Voltage

• Wide-Output Voltage Adjust

(0.8 V to 2.5 V)

• Efficiencies up to 95 %

• 125 W/in³ Power Density

• On/Off Inhibit

• Output Voltage Sense

• Pre-Bias Startup

• Output Over-Current Protection

(Non-Latching, Auto-Reset)

• Auto-Track™ Sequencing

• Margin Up/Down Controls

• Under-Voltage Lockout

• Operating Temp: –40 to +85 °C

• DSP Compatible Output Voltages

• Safety Agency Approvals:

UL 1950, CSA 22.2 950, EN60950

VDE (Pending)

• Point-of-load Alliance (POLA)

Compatible

描述 Description

The PTH03010 series of non-isolated

power modules are small in size but big on

performance and flexibility. Their high

output current, compact footprint, and

industry-leading features offers system

designers a versatile module for powering

complex multi-processor digital systems.

The series employs double-sided surface

mount construction and provides highperformance

step-down power conversion

for up to 15 A of output current from a

3.3-V input bus voltage. The output voltage

of the PTH03010W can be set to any

value over the range, 0.8 V to 2.5 V, using

a single resistor.

This series includes Auto-Track™.

Auto-Track simplifies the task of supply

voltage sequencing in a power system by

enabling modules to track each other, or

any external voltage, during power up

and power down.

Other operating features include an

on/off inhibit, output voltage adjust (trim),

and margin up/down controls. To ensure

tight load regulation, an output voltage

sense is also provided. A non-latching

over-current trip serves as load fault

protection.

Target applications include complex

multi-voltage, multi-processor systems

that incorporate the industry’s high-speed

DSPs, micro-processors and bus drivers.