PQ60033EKx15数据手册Synqor中文资料规格书

描述 Description

The PowerQor® Eighth-brick converter series is composed of next-generation, board-mountable, isolated, fixed switching frequency DC-DC converters that use synchronous rectification to achieve extremely high power conversion efficiency. The power dissipated by the converter is so low that a heatsink is not required, which saves cost, weight, height, and application effort. All of the power and control components are mounted to the multi-layer PCB substrate with high-yield surface mount technology. Since the PowerQor converter has no explicit thermal interfaces, it is extremely reliable. RoHS Compliant (see page 15).

特性 Features

操作特性
• High efficiency, 88% at full rated load current
• Delivers up to 15A of output current with minimum derating - no heatsink required
• Wide input voltage range: 35-75V, with 100V, 100ms input voltage transient capability
• Fixed frequency switching provides predictable EMI performance
• No minimum load requirement means no preload resistors required
机械特征
• Industry standard eighth-brick pin-out configuration
• Size: 0.90” x 2.3” (22.9x58.4mm)
• Low Profile total height only 0.340” (8.64mm), permits better airflow and smaller card pitch
• Total weight: 0.85oz (24g)
• Flanged pins designed to permit surface mount soldering (avoid wave solder) using FPiP technique
控制功能
• On/Off control referenced to input side (positive and negative logic options are available)
• Remote sense for the output voltage compensates for output distribution drops
• Output voltage trim permits custom voltages and voltage margining
安全特性
Pending
• 2000V, 30MΩ input-to-output isolation provides input/output ground separation
• UL 60950-1 recognized (US & Canada), basic insulation rating
• TUV certified to EN60950-1
• Board and plastic components meet UL94V-0 flammability requirements
保护功能
• Input under-voltage lockout disables converter at low input voltage conditions
• Output current limit and short circuit protection protects converter and load from permanent damage and consequent hazardous conditions
• Active back bias limit prevents damage to converter from external load induced pre-bias
• Output over-voltage protection protects load from damaging voltages
• Thermal shutdown protects converter from abnormal environmental conditions