PQ60018QPx60中文资料DC-DC Converter数据手册Synqor规格书

描述 Description

The PQ60018QPA60 PowerQor Peta Quarter-brick converter is a next-generation, board-mountable, isolated, fixed switching frequency DC/DC converter that uses synchronous rectification to achieve extremely high conversion efficiency. The power dissipated by the converter is so low that a heatsink is not required, which saves cost, weight, height, and application effort. All of the power and control components are mounted to the multi-layer PCB substrate with high-yield surface mount technology. Since the PowerQor converter has no explicit thermal interfaces, it is extremely reliable. The Peta series offers industry leading output currents for any standard quarter-brick module. RoHS Compliant see last page.

特性 Features

操作特性
• Delivers up to 60 A of output current with minimal derating
• Wide input voltage range: 35 - 75 V, with 100V 100ms input voltage transient capability
• No minimum load requirement means no preload resistors required
• Industry standard quarter-brick pin-out configuration
• Total height less than 0.45\" (11.4mm), permits better airflow and smaller card pitch
• Flanged pins designed to permit surface mount soldering (avoid wave solder) using FPiP technique
• On/Off control referenced to input side (positive and negative logic options are available)
• Output voltage trim permits custom voltages and voltage margining
• 2000V, 30 MW input-to-output isolation provides input/output ground separation
• TUV certified to EN60950
• Board and plastic components meet UL94V-0 flammability requirements
• Input under-voltage lockout disables converter at low input voltage conditions
• Active back bias limit prevents damage to converter from external load induced pre-bias
• Thermal shutdown protects converter from abnormal environmental conditions