General description

PF5030 is a power management integrated circuit (PMIC) designed for S32Z2/E2

processors. Its input voltage of up to 5.25 V maximum makes it ideal for attachment

to NXP front system supply families (FS86, FS6x) or any other front supply in the

automotive drive train market.

Built-in One-Time Programmable (OTP) memory stores key start-up configurations,

drastically reducing external components typically used to set output voltage and

sequence of external regulators. Regulator parameters are adjustable through highspeed

I2C after start-up, offering flexibility for different system states.

Features and benefits

Voltage Range

• 5.25 V DC maximum operating voltage

• Support operating voltage range down to 3.3 V

• Low power OFF mode with low sleep current (15 μA typical)

Power Supplies

• BUCK1/2: Low voltage integrated synchronous buck converter

– Configurable output voltage from 0.7 V to 1.5 V and current capability up to 3.5 A DC

– Capable of multiphase operation for up to 7.0 A DC

• BUCK3: Low voltage integrated synchronous buck converter

– Configurable output voltage from 1.0 V to 4.1 V and current capability up to 2.5 A DC

• LDO1/2: Low voltage LDO regulator for MCU I/O and system peripheral

– Configurable Output voltage from 1.1 V to 4.1 V and current capability up to 400 mA

DC

System support

• 1x input pin for power-ON detection, 1.8 V, 3.3 V, and 5.0 V compatible

• Analog multiplexer with full system voltages and temperature monitoring

• Enhanced leader / follower power-up sequencing management through XFAILB pin

• 10 ms optional RSTB release delay during power-up for certain MCU compliance

• Device control via 32 bits I2C interface with 8-bit CRC

Compliancy

• EMC optimization techniques on switching regulators including spread spectrum and

manual frequency tuning

• EMI robustness supporting various automotive EMI test standards

• Conducted emission: IEC 61967-4

• Conducted immunity: IEC 62132-4

Functional Safety

• ASIL D capability on safety goal 1 (SG1/CSG_01) on UV/OV for all S32Z2/E2 power

rails (0.8 V, 1.1 V, 1.8 V, and 3.3 V)

• Configurable ASIL from QM to ASIL D on safety goal 2 (SG2/CSG_02) on MCU

monitoring function (watchdog)

• Independent voltage monitoring circuitry

• Up to 6 voltage monitoring inputs with 1.0 target accuracy

• Logical and analog built-in self-test (LBIST/ABIST)

• Safety outputs with latent fault detection mechanism (PGOOD, RSTB, FS0B)

Configuration and enablement

• QFN 40 pins with exposed pad for optimized thermal management

• OTP programming for device customization

Applications

• EV propulsion and power train domain controller

• Chassis-integrated systems

• S32Z2/E2 companion chip