OPAx310 High Output Current, Fast Shutdown, Low Voltage (1.5 V to 5.5 V), RRIO, 3-MHz Operational Amplifier

1 Features • High output current: ±150-mA typical ISC at 5.5 V • Fast enable from shutdown: 0.9-μs typical • Wide operational supply voltage: 1.5 V to 5.5 V • Low input offset voltage: ±250-μV typical • Fail-safe inputs: No diode from inputs to V+ • Optimized quiescent current: 165-μA/ch typ

文件：4.438 Mbytes 页数：57 Pages

TI

德州仪器

OPAx323 20 MHz High Bandwidth, 100 dB CMRR, Low Voltage (1.7 V to 5.5 V), RRIO Zero-Cross Operational Amplifier

1 Features • Zero cross amplifier for 1.7 V to 5.5 V applications • High gain-bandwidth product: 20 MHz • Fast slew-rate: 33 V/μs typical • Fast 0.01 settling: 200 ns typical for 2 V step • Low input offset voltage: ±150 μV typical • Low noise floor: 5.5 nV/√Hz typical at 10 kHz • High outp

文件：2.76314 Mbytes 页数：49 Pages

TI

德州仪器

OPAx323 20MHz High Bandwidth, 114dB CMRR, Low Voltage (1.7V to 5.5V), RRIO Zero-Cross Operational Amplifier

1 Features • Zero cross amplifier for 1.7V to 5.5V applications • High rail-to-rail CMRR: 114dB typical • High gain-bandwidth product: 20MHz • Fast slew-rate: 33V/μs typical • Fast 0.01 settling: 200ns typical for 2V step • Low input offset voltage: ±150μV typical • Low noise floor: 5.5nV/√

文件：4.179979 Mbytes 页数：63 Pages

TI

德州仪器

OPAx328 Precision, 40-MHz, 1.0-pA, Low-Noise, RRIO, CMOS Operational Amplifier With Shutdown

1 Features • Precision with zero-crossover distortion: – Low offset voltage: 50 μV (maximum) – High CMRR: 120 dB – Rail-to-rail I/O • Wide bandwidth: 40 MHz • Low input bias current: 1 pA (maximum) • Low noise: 6.1 nV/√Hz at 10 kHz • Slew rate: 30 V/μs • Fast 0.01 settling time: 180 ns •

文件：1.51535 Mbytes 页数：27 Pages

TI

德州仪器

OPAx328 Precision, 40-MHz, 1.0-pA, Low-Noise, RRIO, CMOS Operational Amplifiers With Shutdown

1 Features • Precision with zero-crossover distortion: – Low offset voltage: 50 μV (maximum) – High CMRR: 120 dB – Rail-to-rail I/O • Wide bandwidth: 40 MHz • Low input bias current: 1 pA (maximum) • Low noise: 6.1 nV/√Hz at 10 kHz • Slew rate: 30 V/μs • Fast 0.01 settling time: 180 ns •

文件：1.64206 Mbytes 页数：31 Pages

TI

德州仪器

OPA2675 Dual, High Output Current Operational Amplifier With Active Off-Line Control

1 Features • Wideband operation: 340 MHz (G = 4V/V) • Unity-gain stable: 730 MHz (G = 1V/V) • High output current: ±1000 mA • Active off-line mode for TDMA • Adjustable power modes: – Full-bias mode: 16.5 mA/channel – 75 bias mode: 12.5 mA/channel – 50 bias mode: 8.5 mA/channel – Off-Line

文件：2.335 Mbytes 页数：37 Pages

TI

德州仪器

OPA2675 Dual, High Output Current Operational Amplifier With Active Off-Line Control

1 Features • Wideband operation: 340 MHz (G = 4V/V) • Unity-gain stable: 730 MHz (G = 1V/V) • High output current: ±1000 mA • Active off-line mode for TDMA • Adjustable power modes: – Full-bias mode: 16.5 mA/channel – 75 bias mode: 12.5 mA/channel – 50 bias mode: 8.5 mA/channel – Off-Line

文件：2.75728 Mbytes 页数：39 Pages

TI

德州仪器

OPAx828 Low-Offset, Low-Drift, Low-Noise, 45-MHz, 36-V JFET-Input, Operational Amplifiers

1 Features • Low input voltage noise density: 4 nV/√Hz at 1 kHz • Input voltage noise: 0.1 Hz to 10 Hz: 60 nVRMS • Low input bias current: 1 pA • Input offset voltage: 50 μV • Input offset drift: 0.45 μV/°C • MUX-friendly inputs • Gain bandwidth: 45 MHz • Slew rate: 150 V/μs • 14-bit se

文件：2.34601 Mbytes 页数：43 Pages

TI

德州仪器

OPAx828 Low-Offset, Low-Drift, Low-Noise, 45-MHz, 36-V, JFET-Input Operational Amplifiers

1 Features • Low input voltage noise density: 4 nV/√Hz at 1 kHz • Input voltage noise: 0.1 Hz to 10 Hz: 60 nVRMS • Low input bias current: – 0.1 pA (DGN) – 1 pA (D) • Input offset voltage: – 25 μV (DGN) – 50 μV (D) • Input offset drift: – 0.2 μV/°C (DGN) – 0.45 μV/°C (D) • MUX-friend

文件：3.10746 Mbytes 页数：47 Pages

TI

德州仪器

OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier

1 Features • Wide-bandwidth – Unity-gain bandwidth: 110-MHz (AV= 1 V/V) – Gain-bandwidth product: 50-MHz • Low power – Quiescent current: 700-μA/ch (typical) – Power down mode: 1.5-μA (maximum, VS= 3 V) – Supply voltage: 2.7-V to 12.6-V • Input voltage noise: 5.9-nV/√Hz • Slew rate: 105-V

文件：2.85149 Mbytes 页数：45 Pages

TI

德州仪器