PM8803中文资料高效的集成式PoE-PD接口和PWM控制器，符合IEEE 802.3at规范数据手册ST规格书

描述 Description

The PM8803 integrates a Power over Ethernet (PoE) interface and a current mode PWM controller to simplify the design of the power supply sections of all powered devices. The PoE/PoE+ interface includes all functions required by the IEEE 802.3at as well as detection, classification, undervoltage lockout (UVLO) and inrush current limitation.

The PM8803 specifically performs IEEE802.3at Layer 1 hardware classification, providing the system with an indication of Type 2 PSE successful detection.

The PM8803 has been designed to work with power either from the Ethernet cable or from an external power source such as a wall adapter, ensuring the priority of the auxiliary source over the PoE. The DC-DC section of the PM8803 features a programmable oscillator frequency, an adjustable slope compensation, dual complementary low-side drivers, programmable dead time and an internal temperature sensor.

The PM8803 targets high-efficiency conversion under all load conditions supporting flyback, forward, forward with active clamp converters and synchronous rectification.

特性 Features

• IEEE 802.3at compliant PD interface
• Works with power supplied from Ethernet LAN cables or from local auxiliary sources
• Successful IEEE802.3at Layer1 classification indicator
• Integrated 100 V, 0.45 Ω, 1 A hot-swap MOSFET
• Accurate 140 mA typ. inrush current level
• Programmable classification current
• Programmable DC current limit up to 1 A
• Integrated high voltage start-up bias regulator
• Thermal shutdown protection
• Current mode pulse width modulator
• Programmable oscillator frequency
• 80% maximum duty cycle with internal slope compensation
• Support for flyback, forward, forward active clamp, flyback with synchronous rectification

简介

PM8803属于集成电路（IC）的以太网供电（PoE）控制器。由制造生产的PM8803以太网供电（PoE）控制器以太网供电 (PoE) 控制器允许设计人员通过单个以太网连接传输电流和数据。远程设备通过以太网电缆供电，因此无需电池、本地电源适配器和其他电源电缆。桥式整流器和 N+1 O-Ring 是两种 PoE 控制器类型。可用特性可能包括 N 和 P 沟道 FET、内部开关和汽车认证。