High Density 84-Channel T1/E1/J1 Framer with Integrated VT/TU Mappers and M13

FEATURES The PM8316 TEMUX-84 is a 155 Mbit/s multi-channel T1/E1 Framer with integrated VT/TU Mappers and M13 Multiplexers. • This monolithic device integrates: • 84 T1 framers • 63 E1 framers • Three SONET/SDH VT1.5/VT2/TU11/TU12 bit asynchronous or byte synchronous mapper

文件：59.08 Kbytes 页数：2 Pages

PMC

High Density 84-Channel T1/E1/J1 Framer with Integrated VT/TU Mappers and M13

FEATURES The PM8316 TEMUX-84 is a 155 Mbit/s multi-channel T1/E1 Framer with integrated VT/TU Mappers and M13 Multiplexers. • This monolithic device integrates: • 84 T1 framers • 63 E1 framers • Three SONET/SDH VT1.5/VT2/TU11/TU12 bit asynchronous or byte synchronous mapper

文件：59.08 Kbytes 页数：2 Pages

PMC

8-Channel 1.0-1.25 Gbps Transceiver

GENERAL DESCRIPTION The OctalPHYTM is an octal PHYsical layer transceiver ideal for systems requiring large numbers of point-to-point gigabit links. It provides eight individual serial channels capable of operation at up to 1.25 Gbps, which may be grouped together to form a single 12.5 Gbps bidir

文件：111.22 Kbytes 页数：2 Pages

PMC

4-Channel 1.0-1.25 Gbps Transceiver

GENERAL DESCRIPTION The QuadPHYTM is a Quad PHYsical layer transceiver ideal for systems requiring large numbers of point-to-point gigabit links. It provides four individual serial channels capable of operation at up to 1.25 Gbps each, which may be grouped together to form a single 5.0 Gbps bidir

文件：122.7 Kbytes 页数：2 Pages

PMC

4-Channel 2.125, 2.5 and 3.125 Gbit/s Transceiver with Half-rate Support

GENERAL DESCRIPTION The QuadPHY-II is a physical layer transceiver ideal for systems requiring high speed point-to-point communication links. It is applicable for PMAPMD connections in 10 GE, Infiniband 1 or 4 x 2.5 Gbit/s links, 1 and 2 Gbit/s Fibre Channel, as well as high speed serial backplan

文件：58.68 Kbytes 页数：2 Pages

PMC

4-Port FC/GE Retimer and FC-AL Port Bypass Controller

GENERAL • Supports 4 Fibre Channel Physical Interfaces at 1.0625 or 2.125 Gbit/s per Fibre Channel – Physical Interface (FC-PI) or 4 Gigabit Ethernet Retimers at 1.25 Gbit/s per IEEE 802.3z. • Each port supports FC 1G or 2G rate detection/auto-selection. • Supports Arbitrated Loop and Ret

文件：279.3 Kbytes 页数：2 Pages

PMC

20-Port 4.25 Gbit/s FC-AL Cut-Through Switch

The CTS 20x4G is designed to interface directly to Fibre Channel disk drives in a storage array. It can interface directly to optics or to cables at the ingress/egress point of an enclosure and is able to determine if an incoming frame is destined for a drive within that enclosure. After determini

文件：78.17 Kbytes 页数：2 Pages

PMC

4-Channel Multiplexer and Link Extender for SAS, SATA, Ethernet and FC

FEATURES GENERAL - SATA AND SAS • Four bi-directional 2:1 SATA or SAS multiplexer/demultiplexer. • Compliant with SAS Internal and External specification. • SATA Gen1i, Gen1x, Gen2i, Gen2x compliant. • In the downstream direction, the QuadSMX 3G demuxes the initiator-side receive po

文件：154.29 Kbytes 页数：2 Pages

PMC

High-Density 32-Channel T1/E1/J1 Framer with Integrated VT/TU Mapper & M13 Multiplexer

文件：159.64 Kbytes 页数：2 Pages

PMC

High-Density 32-Channel T1/E1/J1 Framer with Integrated VT/TU Mapper & M13 Multiplexer

文件：159.64 Kbytes 页数：2 Pages

PMC