E1 TRANSCEIVER

DESCRIPTION The PM6341 E1 Framer/Transceiver (E1XC) is a feature-rich device suitable for use in many E1 systems (such as CSU, DSU, CH BANK, MUX, DPBX, DACS, and ESDX) with a minimum of external circuitry. The E1XC is software configurable, allowing feature selection without changes to external w

文件：42.2 Kbytes 页数：2 Pages

PMC

E1 FRAMER/TRANSCEIVER

DESCRIPTION The PM6341 E1 Framer/Transceiver (E1XC) is a feature-rich device suitable for use in many E1 systems (such as CSU, DSU, CH BANK, MUX, DPBX, DACS, and ESDX) with a minimum of external circuitry. The E1XC is software configurable, allowing feature selection without changes to external w

文件：915.16 Kbytes 页数：272 Pages

PMC

E1 FRAMER/TRANSCEIVER

DESCRIPTION The PM6341 E1 Framer/Transceiver (E1XC) is a feature-rich device suitable for use in many E1 systems (such as CSU, DSU, CH BANK, MUX, DPBX, DACS, and ESDX) with a minimum of external circuitry. The E1XC is software configurable, allowing feature selection without changes to external w

文件：915.16 Kbytes 页数：272 Pages

PMC

E1 FRAMER/TRANSCEIVER

DESCRIPTION The PM6341 E1 Framer/Transceiver (E1XC) is a feature-rich device suitable for use in many E1 systems (such as CSU, DSU, CH BANK, MUX, DPBX, DACS, and ESDX) with a minimum of external circuitry. The E1XC is software configurable, allowing feature selection without changes to external w

文件：915.16 Kbytes 页数：272 Pages

PMC

E1 FRAMER/TRANSCEIVER

DESCRIPTION The PM6341 E1 Framer/Transceiver (E1XC) is a feature-rich device suitable for use in many E1 systems (such as CSU, DSU, CH BANK, MUX, DPBX, DACS, and ESDX) with a minimum of external circuitry. The E1XC is software configurable, allowing feature selection without changes to external w

文件：915.16 Kbytes 页数：272 Pages

PMC

QUADRUPLE E1 FRAMER

Description The PM6344 Quadruple E1 Framer (EQUAD) is a feature-rich device suitable for use in many E1 systems with a minimum of external circuitry. Each of the framers and transmitters is independently software configurable, allowing feature selection without changes to external wiring. On the

文件：1.030369 Mbytes 页数：2 Pages

PMC

QUADRUPLE E1 FRAMER

Description The PM6344 Quadruple E1 Framer (EQUAD) is a feature-rich device suitable for use in many E1 systems with a minimum of external circuitry. Each of the framers and transmitters is independently software configurable, allowing feature selection without changes to external wiring. On the

文件：1.030369 Mbytes 页数：2 Pages

PMC

Octal E1 Framer

FEATURES • Integrates eight E1 framers in a single device for terminating duplex E1 signals. • Supports transfer of PCM data to/from 2.048 MHz system-side devices. Also supports a fractional E1 system interface with independent ingress/egress fractional E1 rates. • Provides an optio

文件：66.38 Kbytes 页数：4 Pages

PMC

Octal E1 Framer

FEATURES • Monolithic single-chip device that integrates eight datacom E1 framers and transmitters for terminating duplex E1 signals. • Frames to ITU-T G.704 basic and CRC-4 multiframe formatted E1 signals and is consistent with ITU-T G.706 specifications. • Extracts/inserts up to three HDLC li

文件：56.52 Kbytes 页数：2 Pages

PMC

Octal E1 Framer

FEATURES • Monolithic single-chip device that integrates eight datacom E1 framers and transmitters for terminating duplex E1 signals. • Frames to ITU-T G.704 basic and CRC-4 multiframe formatted E1 signals and is consistent with ITU-T G.706 specifications. • Extracts/inserts up to three HDLC li

文件：56.52 Kbytes 页数：2 Pages

PMC