PM5369数据手册集成电路（IC）的专用规格书PDF

描述 Description

The PM5369 TUPP-9953 is a 10G configurable SONET/SDH multi-channel payload processor for aligning SONET virtual tributaries (VTs) or SDH tributary units (TUs) in an STS-192/STM-64 or STS-48/STM-16 data stream.

Applications
• SONET/SDH Add-Drop Multiplexer (ADM)
• SONET/SDH Digital Cross-connect (DCC)
• Multi-service Provisioning Platforms (MSPP)
• Multi-service ADM (MS-ADM)
• Multi-Service Switch
• Optical Access Mux
• Terminal Multiplexers

特性 Features

Configurable, multi-channel payload processor for aligning SONET virtual tributaries (VTs) or SDH tributary units (TUs) in an STS-192/STM-64 or STS-48/STM-16 data stream
Supports High Order (STS/AU) pointer processing, payload processing, and path termination/monitoring
Supports Low Order (VT/TU) pointer processing, payload processing, and path monitoring
On the line side, provides working Serial Receive and Transmit ESSI (Extended SONET Serial Interface) CML links. Links are configurable as:
• 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or
• 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces
On the system side, provides working Add and Drop Serial ESSI links. Links are configurable as:
• 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or
• 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces
Independently configurable (2488.32 Mbit/s or 622.08 Mbit/s) Line and System Interfaces
Provides a set of Ingress and Egress shared protection links
Provides a per-link Space switch on egress interfaces
Provides hardware based Message Assisted Protection Switching (MAPS) support to work with a centralized fabric (e.g., PM5370 WSE-40)
Supports independent Line Receive and System Drop transport frame alignment for high-order traffic
Supports independent transport, high-order payload and tributary multi-frame alignments for low-order traffic
Supports independent Line Transmit and System Add transport frame alignments
On the receive path, provides optional SDH payload conversion of:
• AU4/VC4/TUG3/TU3/VC3/C3 to AU3/VC3/C3; or
• AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or
• AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or
• AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2
On the transmit path, provides optional SDH payload conversion of:
• AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or
• AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or
• AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2
Allows for low order (VT/TU) processing bypass
Supports high-order ESSI transport overhead transparency
Supports line and system diagnostic and facility loopbacks
Provides optional PRBS generation and monitoring features for ESSI offline link verification
Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring
Provides a standard 5-signal IEEE 1149.1 JTAG test port for boundary scan test purposes
Implemented in a 1.2 V core and 2.5 V I/O 0.13ìm CMOS technology. Inputs are 3.3 V tolerant
Packaged in a 672-ball FCBGA
Top-hat, 27 mm x 27 mm
Power when full bandwidth is used (OC-192/STM-64 applications using 2.488 Mbit/s links) is 6.91 W typical
Power when 1/4 bandwidth is used (OC-48/STM-16 applications using 622 Mbit/s links) is 2.64 W typical

简介

PM5369属于集成电路（IC）的专用。由制造生产的PM5369专用该系列产品可提供所需的功能，用以将信息源/信宿连到各种复杂或范围狭窄应用中的传感器、变送器、致动器、传输介质或其他此类端点。例如，汽车安全气囊驱动器、车身控制和信息娱乐总线、自适应电缆均衡器、智能卡等等。