PLR中文资料力特数据手册PDF规格书

描述 Description

The PLR Series provides a cost effective means of preventing

3-phase motor startup during adverse voltage conditions. Proper

A-B-C sequence must occur in order for the PLR’s output

contacts to energize. In addition, the relay will not energize

when an undervoltage or phase loss condition is present. The

PLR Series protects a motor against undervoltage operation.

The adjustment knob sets the undervoltage trip point.

Operation

The output relay is energized and the LED glows when all

voltages are acceptable and the phase sequence is correct.

Undervoltage must be sensed for a continuous dropout delay

period before the relay de-energizes. Reset is automatic upon

correction of the fault condition. The output relay will not

energize if a fault condition is sensed as power is applied.

Field Adjustment: Turn the adjustment knob fully

counterclockwise and apply three-phase power. The LED should

be ON. Increase adjustment until the LED goes OFF. Decrease

adjustment until LED glows again. If nuisance tripping occurs,

decrease the adjustment slightly.

NOTE: When properly adjusted and operating in an average system, a voltage unbalance of 10

or more is required for phase loss detection. When a phase is lost while the motor is running, a

voltage will be induced into the open phase nearly equal in magnitude to the normal phase-tophase

voltage. This condition is known as regeneration. When regenerated voltages are present,

the voltage unbalance during single phasing may not exceed 10 for some motors. The PLR

Series may not provide protection under this condition. For systems that require superior phase

loss protection, select the PLMU Series.

FEATURES BENEFITS

Continuous monitoring Prevents 3-phase motor startup when undervoltage

or phase loss condition is present

Industry standard 8-pin

octal plug connection Eliminates need for special connectors

LED indication Quick visual indication of output status and correct

phase sequence