PIC24HJ128GP510A数据手册Microchip中文资料规格书

描述 Description

The PIC24H 16-bit device family employs a powerful 16-bitarchitecture, ideal for applications that rely on high-speed, repetitivecomputations, as well as control. The devices are pin compatible with thedsPIC33F family of devices, and share a very high degree of compatibility withthe dsPIC30F family devices. This allows seamless migration options from/toPIC24F, dsPIC30F and dsPIC33F devices.

特性 Features

Operating Conditions Up to 40 MIPS operation
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
High-Efficiency PIC24H core
• Code-efficient (C and Assembly) architecture
Single-cycle mixed-sign MUL plus hardware divide
• 16 x 16 multiply operations
• 32/16 and 16/16 divide operations
• Up to ±16-bit data shifts
Clock Management
• ±2% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast wake-up and start-up
Power Management On-chip 2.5V voltage regulator
• Low-power management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.35 mA/MHz dynamic current (typical)
• 55 μA IPD current (typical) Advanced
Analog Features Two ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 Ksps with one S&H,
• 18 analog inputs on 64-pin devices and up to 32 analog inputs on 100-pin devices
• Flexible and independent ADC trigger sources
Timers/Output Compare/Input Capture
• Up to nine 16-bit timers/counters. Can pair up to make four 32-bit timers
• Eight Output Compare modules configurable as timers/counters
• Eight Input Capture modules
Communication Interfaces
• Two UART modules (10 Mbps) - With support for LIN 2.0 protocols and IrDA®
• Two 4-wire SPI modules (15 Mbps)
• Up to two I2C™ modules (up to 1 Mbaud) with SM Bus support
Enhanced CAN (ECAN) module (1 Mbaud) with 2.0B support
• Data Converter Interface (DCI) module with I2S codec support
Input/Output
• Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for nonstandard VOH1
• 5V-tolerant pins
• Selectable open drain, pull-ups, and pull-downs
• Up to 5 mA overvoltage clamp current
• External interrupts on all I/O pins
Debugger Development Support
• In-circuit and in-application programming
• Two programs and two complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Trace and run-time watch