PIC16C84-04/P中文资料8-bit CMOS EEPROM Microcontroller数据手册Microchip规格书

描述 Description

GENERAL DESCRIPTION
The PIC16C84 is a low-cost, high-performance, CMOS, fully-static, 8-bit microcontroller.
All PIC16/17 microcontrollers employ an advanced RISC architecture. PIC16CXX devices have enhanced core features, eight-level deep stack, and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14-bit wide instruction word with a separate 8-bit wide data bus. The two stage instruction pipeline allows all instructions to execute in a single cycle, except for program branches (which require two cycles). A total of 35 instructions (reduced instruction set) are available. Additionally, a large register set is used to achieve a very high performance level.High Performance RISC CPU Features:
• Only 35 single word instructions to learn
• All instructions single cycle (400 ns @ 10 MHz) except for program branches which are two-cycle
• Operating speed: DC - 10 MHz clock input DC - 400 ns instruction cycle
• 14-bit wide instructions
• 8-bit wide data path
• 1K x 14 EEPROM program memory
• 36 x 8 general purpose registers (SRAM)
• 64 x 8 on-chip EEPROM data memory
• 15 special function hardware registers
• Eight-level deep hardware stack
• Direct, indirect and relative addressing modes
• Four interrupt sources:
   - External RB0/INT pin
   - TMR0 timer overflow
   - PORTB<7:4 interrupt on change
   - Data EEPROM write complete
• 1,000,000 data memory EEPROM ERASE/WRITE cycles
• EEPROM Data Retention 40 yearsPeripheral Features:
• 13 I/O pins with individual direction control
• High current sink/source for direct LED drive
   - 25 mA sink max. per pin
   - 20 mA source max. per pin
• TMR0: 8-bit timer/counter with 8-bit programmable prescalerSpecial Microcontroller Features:
• Power-on Reset (POR)
• Power-up Timer (PWRT)
• Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
• Code protection
• Power saving SLEEP mode
• Selectable oscillator options
• Serial In-System Programming - via two pinsCMOS Technology:
• Low-power, high-speed CMOS EEPROM technology
• Fully static design
• Wide operating voltage range:
   - Commercial: 2.0V to 6.0V
   - Industrial: 2.0V to 6.0V
• Low power consumption:
   - < 2 mA typical @ 5V, 4 MHz
   - 60 A typical @ 2V, 32 kHz
   - 26 A typical standby current @ 2V