PI2DPT821中文资料1.8V 4 Lane DP1.4 8.1 Gbps Retimer数据手册Diodes规格书

描述 Description

The DIODES™ PI2DPT821 is a bit level Retimer with receiver adaptive CTLE and transmitter 2-tap equalization which can compensate channel loss up to -18dB for 4.05GHz signal transmission. It supports DP1.4 and USB 3.2 Gen 1 standards for USB Type-C® DP ALT mode operation. The operation configurations are programmable via I2C interface to select 4-lane DP, 2-lane DP/1 lane USB 3.2 Gen 1, 1 or 2 lane USB 3.2 Gen 1.

To achieve good power saving management, this device uses the common 1.8v Vdd power supply. It complies with USB link power management states for active mode (U0) and power saving mode (U1, U2, U3). USB Rx detection monitors the plug condition of the TX terminals continuously.

Under DisplayPort operation, the AUX Listener will monitor the AUX communication for data rate, lane count, swing & pre-emphasis setting and power saving D3 mode setting. The SINK side HPD connection signal is set via I2C register by the system PD controller. The integrated AUX/ SBU switch switches the DisplayPort AUX+/- pins and the Type-C SBU1/ SBU2 pins automatically.

With the merit of the bit level Retimer design, PI2DPT821 has very low latency from signal input to output (< 1ns) that serves good interoperability among various USB and DP devices.