首页>PEB20534>规格书详情

PEB20534集成电路(IC)的专用规格书PDF中文资料

PEB20534
厂商型号

PEB20534

参数属性

PEB20534 封装/外壳为208-BFQFP;包装为管件;类别为集成电路(IC)的专用;产品描述:IC INTERFACE SPECIALIZED 208FQFP

功能描述

DMA Supported Serial Communication Controller with 4 Channels
IC INTERFACE SPECIALIZED 208FQFP

封装外壳

208-BFQFP

文件大小

4.98565 Mbytes

页面数量

439

生产厂商 Infineon Technologies AG
企业简称

INFINEON英飞凌

中文名称

英飞凌科技股份公司官网

原厂标识
INFINEON
数据手册

原厂下载下载地址一下载地址二到原厂下载

更新时间

2025-8-4 11:10:00

人工找货

PEB20534价格和库存,欢迎联系客服免费人工找货

PEB20534规格书详情

PEB20534属于集成电路(IC)的专用。由英飞凌科技股份公司制造生产的PEB20534专用该系列产品可提供所需的功能,用以将信息源/信宿连到各种复杂或范围狭窄应用中的传感器、变送器、致动器、传输介质或其他此类端点。例如,汽车安全气囊驱动器、车身控制和信息娱乐总线、自适应电缆均衡器、智能卡等等。

Overview

The DSCC4 is a DMA Supported Serial Communication Controller with four independent serial channels1). The serial channels are derived from updated protocol logic of the ESCC device family providing a large set of protocol support and variety in serial interface configuration. This allows easy integration to different environments and applications.

特性 Features

Serial Communication Controllers (SCCs)

• Four independent channels

• Full duplex data rates on each channel of up to 10 Mbit/s sync - 2 Mbit/s with DPLL, 2 Mbit/s async

• Full duplex data rate of up to 52 Mbit/s on any two channels in high speed mode (HDLC: Address Mode 0 and extended transparent protocol mode); up to 45 Mbit/s on any two channels in high speed mode (HDLC: PPP modes). The aggregate bandwith for all channels is limited to 108 Mbit/s per direction.

• 17 DWORDs deep receive FIFO per SCC (+ 128 DWORDs central receive FIFO).

• 8 DWORDs deep transmit FIFO per SCC (+ 128 DWORDs central transmit FIFO).

Serial Interface

• On-chip clock generation or external clock sources

• On-chip DPLLs for clock recovery

• Baud rate generator

• Clock gating signals

• Clock gapping capability

• Programmable time-slot capability for connection to TDM interfaces (e.g. T1, E1)

• NRZ, NRZI, FM and Manchester data encoding

• Optional data flow control using modem control lines (RTS, CTS, CD)

• Support of bus configuration by collision detection and resolution

• HDLC/SDLC Protocol Modes

– Automatic flag detection and transmission

– Shared opening and closing flag

– Generation of interframe-time fill ’1’s or flags

– Detection of receive line status

– Zero bit insertion and deletion

– CRC generation and checking (CRC-CCITT or CRC-32)

– Transparent CRC option per channel and/or per frame

– Programmable Preamble (8 bit) with selectable repetition rate

– Error detection (abort, long frame, CRC error, short frames)

• Bit Synchronous PPP Mode

– Bit oriented transmission of HDLC frame (flag, data, CRC, flag)

– Zero bit insertion/deletion

– 15 consecutive ’1’ bits abort sequence

• Octet Synchronous PPP Mode

– Octet oriented transmission of HDLC frame (flag, data, CRC, flag)

– Programmable character map of 32 hard-wired characters (00H-1FH)

– Four programmable characters for additional mapping

– Insertion/deletion of control-escape character (7DH) for mapped characters

• Asynchronous PPP Mode

– Character oriented transmission of HDLC frame (flag, data, CRC, flag)

– Start/stop bit framing of single character

– Programmable character map of 32 hard-wired characters (00H-1FH)

– Four programmable characters for additional mapping

– Insertion/deletion of control-escape character (7DH) for mapped characters

• Asynchronous (ASYNC) Protocol Mode

– Selectable character length (5 to 8 bits)

– Even, odd, forced or no parity generation/checking

– 1 or 2 stop bits

– Break detection/generation

– In-band flow control by XON/XOFF

– Immediate character insertion

– Termination character detection for end of block identification

– Time out detection

– Error detection (parity error, framing error)

• BISYNC Protocol Mode

– Programmable 6/8 bit SYN pattern (MONOSYNC)

– Programmable 12/16 bit SYN pattern (BISYNC)

– Selectable character length (5 to 8 bits)

– Even, odd, forced or no parity generation/checking

– Generation of interframe-time fill ’1’s or SYN characters

– CRC generation (CRC-16 or CRC-CCITT)

– Transparent CRC option per channel and/or per frame

(Continue ...)

产品属性

更多
  • 产品编号:

    PEB20534H52-V2.1

  • 制造商:

    Infineon Technologies

  • 类别:

    集成电路(IC) > 专用

  • 包装:

    管件

  • 接口:

    PCI

  • 电压 - 供电:

    3V ~ 5.25V

  • 封装/外壳:

    208-BFQFP

  • 供应商器件封装:

    P-FQFP-208-7

  • 安装类型:

    表面贴装型

  • 描述:

    IC INTERFACE SPECIALIZED 208FQFP

供应商 型号 品牌 批号 封装 库存 备注 价格
SIEMENS/西门子
23+
QFP
3000
一级代理原厂VIP渠道,专注军工、汽车、医疗、工业、
询价
Infineon
24+
MQFP208
2978
100%全新原装公司现货供应!随时可发货
询价
SIEMENS
02+
QFP
11
询价
INFINEON
25+
QFP
3386
品牌专业分销商,可以零售
询价
TI/德州仪器
23+
QFN40
69820
终端可以免费供样,支持BOM配单!
询价
INFINEON/英飞凌
2447
QFP
100500
一级代理专营品牌!原装正品,优势现货,长期排单到货
询价
Infineon/英飞凌
19+
68000
原装正品价格优势
询价
INF
25+23+
QFN
51938
绝对原装正品现货,全新深圳原装进口现货
询价
INFINEON
24+
QFP-208
6980
原装现货,可开13%税票
询价
INFINEON/英飞凌
22+
QFP
17800
原装正品
询价