PDI1284P11DL中文资料3.3 V parallel interface transceiver/buffer数据手册Nexperia规格书

描述 Description

The PDI1284P11 parallel interface chip is designed to provide an asynchronous, 8-bit, bidirectional, parallel interface for personal computers. The PDI1284P11 includes all 19 signal lines defined by the IEEE 1284 interface specification for Byte, Nibble, EPP, and ECP modes. The PDI1284P11 is designed for hosts or peripherals operating at 3.3 V to interface 3.3 V or 5.0 V devices.
The eight transceiver pairs (A/B 1 to 8) allow data transmission from the A-bus to the B-bus, or from the B-bus to the A-bus, depending on the state of the direction pin DIR.
The B-bus and the Y9 to Y13 lines have either totem pole or resistor pull-up outputs, depending on the state of the high drive enable pin HD. The A-bus has only totem pole style outputs. All inputs are TTL compatible with at least 400 mV of input hysteresis at VCC= 3.3 V.

特性 Features

• Asynchronous operation
• 8-bit transceivers
• Six additional buffer/driver lines peripheral to cable
• Five additional control lines from cable
• 5 V tolerant
• ESD protection:
• HBM JESD22-A114E exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V

• Latch-up current protection exceeds 500 mA per JEDEC Std 19
• Input hysteresis
• Low-noise operation
• IEEE 1284 compliant level 1 and 2
• Overvoltage protection on B/Y side for off-state
• A side 3-state option
• B side active or resistive pull-up option
• Cable side supply voltage for 5 V or 3 V operation

应用 Application

• Printer interface