PD70200数据手册集成电路（IC）的以太网供电（PoE）控制器规格书PDF

描述 Description

The PD70200 device is a part of Microchip’s series of Power over Ethernet (PoE) Powered Devices (PDs). The device transmits integrated power and analog data in a single 12-pin package. It is used in PDs, thus enabling next generation network devices to share power and data over the same cable. Microchip’s new PD family offers a solution to any PD application compliant with IEEE 802.3af and IEEE 802.3at standards and 4-pairs extra power applications. The IC family’s components can be used in both indoor and outdoor applications. The device family meets all PD-side-standards such as:Detection classificationIntegrated isolation switch with inrush current limiter, and over-current protectionTwo-events classification recognition and AT flag generationIn addition, the devices have a discharge mechanism for a DC / DC input capacitor, ensuring quick redetection capability in case the RJ-45 plug is disconnected and reconnected within a short time span. The PD70200 IC design specifically supports IEEE 802.3at Type 2 standard, including two events classification detection that enables the PD to distinguish whether the connected power source equipment (PSE) is IEEE 802.3at or IEEE 802.3af based. The PD70200 IC is designed to support 4 pair applications for PDs that require higher power.Start your PoE PD power supply design using Microchip MPLAB® Analog Designer.

特性 Features

Designed to support IEEE 802.3at Type 2 standard
PD detection & programmable classification signature
Two-events classification flag
Signature resistor disconnection after detection
Integrated 0.6O isolating switch and inrush current limiter
4-pairs support with a single PD70200 IC for up to 48W
4-pairs support with two PD70200 ICs for up to 96W
Less than 10 µA offset current during detection
Single DC voltage input (37V – 57V)
Wide operating temperature range: -40°C to 85°C
On-chip thermal protection
12-pin 3mm × 4mm package
MSL3, RoHS compliant

简介

PD70200属于集成电路（IC）的以太网供电（PoE）控制器。由制造生产的PD70200以太网供电（PoE）控制器以太网供电 (PoE) 控制器允许设计人员通过单个以太网连接传输电流和数据。远程设备通过以太网电缆供电，因此无需电池、本地电源适配器和其他电源电缆。桥式整流器和 N+1 O-Ring 是两种 PoE 控制器类型。可用特性可能包括 N 和 P 沟道 FET、内部开关和汽车认证。