NEMA 23 smart stepper motor 12 to 52V, 55Ncm, 256 µSteps, S-Shaped and SixPoint ramp controller with CAN interface, closed loop

The PD57/60/86-1378 is an easy to use PANdrive™ smart stepper drive. The drive is controlled via a CAN bus interface and comes with two firmware options – TMCL™ and CANopen®.\n\n With its built-in high resolution encoder, the PD57/60/86-1378 is mainly designed for closed-loop operation, but als \n• Supply Voltage +12 to +52V DC\n• CAN bus interface\n• TMCL™ or CANopen® protocol\n• StealthChop™ silent PWM mode\n• Integrated ramp motion controller with different ramp types\n• SpreadCycle™ smart mixed decay\n• StallGuard2™ load detection\n• CoolStep™ automatic current scaling;

ADI

亚德诺

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 配件 描述：CABLE LOOM FOR PD-1370

Trinamic Motion Control GmbH

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 配件 描述：CABLE LOOM FOR PD-1378

Trinamic Motion Control GmbH