57mm / NEMA23 Stepper Motor with Controller / Driver and Serial Interface

文件：213.17 Kbytes 页数：1 Pages

TRINAMIC

Plasma Display 10 Characters, 7 Segments, Annunciators

文件：51.38 Kbytes 页数：2 Pages

VishayVishay Siliconix

威世威世科技公司

Plasma Display 10 Characters, 7 Segments, Annunciators

文件：50.44 Kbytes 页数：2 Pages

VishayVishay Siliconix

威世威世科技公司

Plasma Display 10 Characters, 7 Segments, Annunciators

文件：50.44 Kbytes 页数：2 Pages

VishayVishay Siliconix

威世威世科技公司

Plasma Display 10 Characters, 7 Segments, Annunciators

文件：50.44 Kbytes 页数：2 Pages

VishayVishay Siliconix

威世威世科技公司

cDriver智能步进电机

PD28-1021 is a full mechatronic solution including a 28mm flange motor (NEMA11). It joins a convenient controller electronic and a SensOstep™ encoder with a range of different motor torques. PD28-1021offers two motor torque options and can be controlled via RS-485 serial interface. The powersupply, Highlights\n• Motion profile calculation in real-time \n\n• On the fly alteration of motor parameters (e.g., position, velocity, acceleration)\n\n• High performance microcontroller for overall system control and serial communication protocol handling\n\n• For position movement applications, where la;

ADI

亚德诺

NEMA 17 smart stepper motor 9 to 28V, 22Ncm, 256 µSteps, with S/D and UART interface, StallGuard2, CoolStep and StealthChop

PD-1070 is an easy to use PANdrive™ smart stepper motor. The unit is controlled via a step and direction interface. One configuration pin selects the current control mode between StealthChop™ for absolute silent motor control and SpreadCycle™ for high speed. A TTL UART interface allows for more adva \n• Supply Voltage +9 to +24V DC\n\n• Step and direction interface\n\n• MicroPlyer™ to 256 µ-steps\n\n• StealthChop™ silent PWM mode\n\n\n\n• SpreadCycle™ smart mixed decay\n\n• StallGuard2™ load detection\n\n• CoolStep™ automatic current scaling\n\n• UART configuration interface;

ADI

亚德诺

NEMA 23 smart stepper motor 9 to 51V, 55Ncm, 256 µSteps, with S/D and UART interface, StallGuard2, CoolStep and StealthChop

The PANdrive™ PD57/60-x-1076 is a full mechatronic solution with state of the art feature set. It is highly integrated and offers a convenient handling.\n\n The PD57/60-x-1076 includes a stepper motor and driver electronics. The module is controlled via a step and direction interface. One confi \n• Supply Voltage +10 to +30V DC\n\n• Up to 3A RMS motor current\n\n• Step and direction interface\n\n• MicroPlyer™ to 256 microsteps\n\n• StealthChop™ silent PWM mode\n\n\n\n• SpreadCycle™ smart mixed decay\n\n• StallGuard2™ load detection\n\n• CoolStep™ autom. current scaling\n\n• UART configurat;

ADI

亚德诺

包装：盒 类别：RF/IF，射频/中频和 RFID RF 功率分配器/分线器 描述：POWER DIVIDER

L3 Narda-MITEQ

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 配件 描述：CABLE LOOM FOR PD42-X-1070

Trinamic Motion Control GmbH