BS-1363 UNITED KINGDOM RECEPTACLE 13A 250VAC

文件：43.45 Kbytes 页数：1 Pages

POWERDYNAMICS

SOUTH AMERICAN RECEPTACLE 10A/15A 250VAC

文件：32.93 Kbytes 页数：1 Pages

POWERDYNAMICS

57mm BLDC Motor mit intelligenter Elektronik and Serieller Schnittstelle

文件：107.73 Kbytes 页数：2 Pages

TRINAMIC

57mm BLDC Motor with Intelligent Electronics and Serial Interface

文件：148.35 Kbytes 页数：2 Pages

TRINAMIC

57mm diameter BLDC Encoder Motor with Controller/Driver and Serial Interface

文件：311.25 Kbytes 页数：1 Pages

TRINAMIC

2 way 180 Power Combiner/Splitter

文件：59.61 Kbytes 页数：1 Pages

BOWEI

博威集成电路

2 way 180 Power Combiner/Splitter

文件：59.61 Kbytes 页数：1 Pages

BOWEI

博威集成电路

NEMA 17 smart stepper motor 9 to 28V, 22Ncm, 256 µSteps, with S/D and UART interface, StallGuard2, CoolStep and StealthChop

PD-1070 is an easy to use PANdrive™ smart stepper motor. The unit is controlled via a step and direction interface. One configuration pin selects the current control mode between StealthChop™ for absolute silent motor control and SpreadCycle™ for high speed. A TTL UART interface allows for more adva \n• Supply Voltage +9 to +24V DC\n\n• Step and direction interface\n\n• MicroPlyer™ to 256 µ-steps\n\n• StealthChop™ silent PWM mode\n\n\n\n• SpreadCycle™ smart mixed decay\n\n• StallGuard2™ load detection\n\n• CoolStep™ automatic current scaling\n\n• UART configuration interface;

ADI

亚德诺

NEMA 23 smart stepper motor 9 to 51V, 55Ncm, 256 µSteps, with S/D and UART interface, StallGuard2, CoolStep and StealthChop

The PANdrive™ PD57/60-x-1076 is a full mechatronic solution with state of the art feature set. It is highly integrated and offers a convenient handling.\n\n The PD57/60-x-1076 includes a stepper motor and driver electronics. The module is controlled via a step and direction interface. One confi \n• Supply Voltage +10 to +30V DC\n\n• Up to 3A RMS motor current\n\n• Step and direction interface\n\n• MicroPlyer™ to 256 microsteps\n\n• StealthChop™ silent PWM mode\n\n\n\n• SpreadCycle™ smart mixed decay\n\n• StallGuard2™ load detection\n\n• CoolStep™ autom. current scaling\n\n• UART configurat;

ADI

亚德诺

Full mechatronic device up to 1.1A RMS / 24V RS232, RS485, I2C or CAN stallGuard™ NEMA17/42mm stepper motor

The PD-110-42 is a full mechatronic solution including a 42mm flange motor (NEMA17). It joins a convenient controller electronic with a range of different motor torques. The PD-110-42 offers two motor torque options and can be controlled via RS232 or RS485 interface. The power supply, interface and Electrical dataup to 1.1A coil current RMS (1.5A peak)\n7V to 34V motor supply voltage\nsupports two phase bipolar motors with 0.3A to 1.1A coil current\nInterfaceRS232, RS485, I2C or CAN 2.0b host interface\n2 inputs for reference and stop switches\n1 general purpose input and 1 output\nSoftwaresta;

ADI

亚德诺