PCM6140-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• Multichannel high-performance ADC:

– 4-channel analog microphones or line-in,

– 8-channel digital PDM microphones, or

– Combination of analog and digital microphones

• ADC line and microphone differential input

performance:

– Dynamic range (DR):

• 120dB, dynamic range enhancer (DRE)

enabled

• 108dB, DRE disabled

– THD+N: –98dB

• ADC channel summing mode, DR performance:

– 111dB, DRE disabled, 2-channel summing

– 114dB, DRE disabled, 4-channel summing

• ADC input voltage:

– Differential, 2VRMS full-scale inputs

– Single-ended, 1VRMS full-scale inputs

• ADC sample rate (fS) = 8kHz to 768kHz

• Programmable channel settings:

– Channel gain: 0dB to 42dB, 1dB steps

– Digital volume control: –100dB to 27dB

– Gain calibration with 0.1dB resolution

– Phase calibration with 163ns resolution

• Programmable microphone bias or supply voltage

generation

• Low-latency signal processing filter selection

• Programmable HPF and biquad digital filters

• Automatic gain controller (AGC)

• I2C or SPI controls

• Integrated high-performance audio PLL

• Automatic clock divider setting configurations

• Audio serial data interface:

– Format: TDM, I2S, or left-justified (LJ)

– Word length: 16 bits, 20 bits, 24 bits, or 32 bits

– Controller or target interface

• Single-supply operation: 3.3V or 1.8V

• I/O-supply operation: 3.3V or 1.8V

• Power consumption for 1.8V AVDD supply:

– 8.5mW/channel at 16kHz sample rate

– 9.2mW/channel at 48kHz sample rate

2 Applications

• Microphone array systems

• Voice-activated digital assistants

• Teleconferencing systems

• Security and surveillance systems

3 Description

The PCM5140-Q1 is a Burr-Brown™ highperformance,

audio analog-to-digital converter (ADC)

that supports simultaneous sampling of up to four

analog channelsor eight digital channels for the pulse

density modulation (PDM) microphone input. The

device supports line and microphone inputs, and

allows for both single-ended and differential input

configurations. The device integrates programable

channel gain, digital volume control, a programmable

microphone bias voltage, a phase-locked loop (PLL),

a programmable high-pass filter (HPF), biquad filters,

low-latency filter modes, and allows for sample

rates up to 768kHz , and allows for sample rates

up to 192kHz. The device supports time-division

multiplexing (TDM), I2S, or left-justified (LJ) audio

formats, and can be controlled with either the I2C

or SPI. These integrated high-performance features,

along with the ability to be powered from a singlesupply

of 3.3V or 1.8V, make the device an excellent

choice for space-constrained audio systems in farfield

microphone recording applications.

The PCM5140-Q1 is specified from –40°C to +125°C,

and is offered in a 24-pin VQFN package.