Cable Accessories

文件：71.75 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Economic DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K) for trajectory planning (circular trajectory and auto blending are not supported) ƒƒ Supports E-Gear ƒƒ Hardware emergency input ƒƒ Watchdog timer ƒƒ Program

文件：283.16 Kbytes 页数：1 Pages

ADVANTECH

研华科技

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

文件：253.91 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

文件：293.28 Kbytes 页数：1 Pages

ADVANTECH

研华科技

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

文件：282.18 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Basic Motion Control Card with Multi Latch/Compare Trigger Function

Features ƒƒ Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Support velocity motion ƒƒ Supports speed override ƒƒ Supports T/S-curve and programmable acceleration/d

文件：285.99 Kbytes 页数：1 Pages

ADVANTECH

研华科技

4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

文件：296.25 Kbytes 页数：1 Pages

ADVANTECH

研华科技

4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

文件：296.25 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Economic DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K) for trajectory planning (circular trajectory and auto blending are not supported) ƒƒ Supports E-Gear ƒƒ Hardware emergency input ƒƒ Watchdog timer ƒƒ Program

文件：283.16 Kbytes 页数：1 Pages

ADVANTECH

研华科技

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

文件：253.91 Kbytes 页数：1 Pages

ADVANTECH

研华科技