PCIE-ROOTPORT-AD数据手册计算机设备的适配器卡规格书PDF

描述 Description

PCIe Root Port Adapter CardMicrosemi PolarFire® FPGAs support fully integrated PCIe Endpoint and Root Port subsystems with optimized embedded controller blocks that use the physical layer interface (PHY) of the transceiver. Each PolarFire device includes two embedded PCIe subsystem (PCIESS) blocks that can be configured either separately, or as a pair, using the PF_PCIE IP configurator in the Libero® System-on-Chip (SoC) PolarFire software. The PF_PCIE IP core is compliant with the PCI Express Base Specification, Revision 2.1. It implements memory-mapped advanced microcontroller bus architecture (AMBA) advanced extensible interface 4 (AXI4) access to the PCIe space and the PCIe access to the memory-mapped AXI4 space.For more information, see  Microsemi’s PCIe RootPort Adapter Card is a hardware evaluation platform for evaluating and testing the PolarFire FPGA PCIe Root Port capabilities like the enumeration of an Endpoint device, low-speed and high-speed data transfers. Key FeaturesThe PCIESS is a hard PCI Express protocol stack embedded within every PolarFire device and includes the following important features. PolarFire transceivers for 2.5 and 5.0 Gbps line speeds Native x1, x2, and x4 lane-support PCIe block (down-configurable/downgradable) Root port support for up to two 32-bit or one 64-bit BAR. PCI express base specification 1.1- and 2.1-compliant Legacy PCI power management support 64-bit AXI master and slave interface to the FPGA fabric End-to-end data integrityTo evaluate Microsemi’s PCIe Root Port Adapter card, a two board hardware setup is utilized. The above-mentioned adapter module plugs into the PolarFire Evaluation Kit which features the PolarFire MPF300TS-1FCG1152I Device. Both development boards are required and have to be purchased separately.  They do include a free one-year Gold license for Libero SoC PolarFire design suite software.Contact your Microsemi sales representative for details on obtaining this solution.  ROHS, PB Free-->  ROHS