Universal LCD driver for low multiplex rates

GENERAL DESCRIPTION The PCF8566 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) having low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 24 segments and can easily be cascaded for l

文件：243.31 Kbytes 页数：40 Pages

PHI

飞利浦

Universal LCD driver for low multiplex rates

General description The PCF8566 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 24 segments and can easily be cascaded for lar

文件：247.66 Kbytes 页数：48 Pages

恩XP

Universal LCD driver for low multiplex rates

General description The PCF8566 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 24 segments and can easily be cascaded for lar

文件：247.66 Kbytes 页数：48 Pages

恩XP

Universal LCD driver for low multiplex rates

The PCF8566 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 24 segments and can easily be cascaded for larger LCD applications. The Single-chip LCD controller/driver\n24 segment drives: Up to twelve 7-segment numeric characters including decimal pointer\nUp to six 14-segment alphanumeric characters\nAny graphics of up to 96 elements\nVersatile blinking modes\nNo external components required (even in multiple device applications);

恩XP

恩智浦

低复用率通用LCD驱动器

PCF8566是一款外围器件，能驱动几乎任何低复用率液晶显示器(LCD)。可为任何包含最多4背板和24分段且可方便级联进行更大LCD应用的静态或多路复用LCD生成驱动信号。PCF8566兼容大多数微处理器或微控制器并通过两线双向I²C总线进行通信。通过带有自动递增寻址的显示RAM、硬件从地址寻址以及显示存储器切换（静态和多路复用驱动模式）使通信开销最小化。 单芯片LCD控制器/驱动器\n24个段码驱动： 最多20个包括小数点的7段码数字字符\n最多6个14段码字母数字字符\n最多96元素的任何图形\n\n通用闪烁模式\n无需外部组件（即使在多器件应用中）\n可选背板驱动配置：静态或者2、3、4背板多路复用\n可选显示偏置配置：静态、1/2或1/3\n带有电压跟随缓冲器的内部LCD偏置生成\n用于存储显示数据的24 × 4位RAM\n跨越器件子地址边界进行自动递增显示数据加载\n静态和1/2驱动模式的显示存储器组切换\n可分离LCD和逻辑电源\n2.5 V至6 V的电源范围\n低功耗\n使电池供电和电话应用的功耗极低的节电模式\nI²C总线接口\n;

恩XP

恩智浦