PCF8536BT数据手册恩XP中文资料规格书

描述 Description

The PCF8536 is a peripheral device which interfaces to almost any Liquid Crystal Display(LCD) with low multiplex rates. It generates the drive signals for any multiplexed LCDcontaining up to eight backplanes, up to 44 segments, and up to 320 elements. ThePCF8536 is compatible with most microcontrollers and communicates via the two-linebidirectional I²C-bus (PCF8536AT) or a three line unidirectional SPI-bus (PCF8536BT).Communication overheads are minimized using a display RAM with auto-incrementedaddressing.
The PCF8536 features an on-chip PWM controller for LED illumination. Up to sixindependent channels can be configured. Each channel has 128 levels allowing thepossibility for two RGB controllers. Each of them provides over 2 million colors. Eachchannel can also be used for static drive.

特性 Features

Single-chip 320 segment LCD controller and driver with 6 channel PWM generator
6 channel PWM generator for backlight LED illumination
Selectable display bias configuration
Wide range for digital power supply: from 1.8 V to 5.5 V
Wide LCD supply range: from 2.5 V for low threshold LCDs and up to 9.0 V for high threshold twisted nematic LCDs
Low power consumption
Selectable backplane drive configuration: 4, 6, or 8 backplane multiplexing
LCD and logic supplies may be separated
320-bit RAM for display data storage
6 PWM outputs with a 7-bit resolution (128 steps) and drivers for external transistors
Programmable PWM frame frequency to avoid LCD backlight flickering
400 kHz I²C-bus interface (PCF8536AT)
5 MHz SPI-bus interface (PCF8536BT)
Programmable frame frequency in the range of 60 Hz to 300 Hz in steps of approximately 10 Hz; factory calibrated
320 segments driven allowing:up to 40 7-segment alphanumeric characters
up to 20 14-segment alphanumeric characters
any graphics of up to 320 elements
Manufactured in silicon gate CMOS process

应用 Application

White goods and consumer products