Remote 8-bit I/O expander for Fm I2C-bus with interrupt and reset

文件：172.53 Kbytes 页数：27 Pages

恩XP

Smart, simple solutions for the 12 most common design concerns

文件：727.81 Kbytes 页数：8 Pages

恩XP

Remote 8-bit I/O expander for Fm I2C-bus with interrupt and reset

文件：172.53 Kbytes 页数：27 Pages

恩XP

Remote 8-bit I/O expander for Fm I2C-bus with interrupt and reset

文件：172.53 Kbytes 页数：27 Pages

恩XP

Remote 8-bit I/O expander for Fm I2C-bus with interrupt and reset

文件：172.53 Kbytes 页数：27 Pages

恩XP

Remote 8-bit I/O expander for Fm+ I2C-bus with interrupt and reset

The PCA9672 provides general-purpose remote I/O expansion via the two-wirebidirectional I²C‑bus (serial clock (SCL), serial data (SDA)).\nThe devices consist of eight quasi-bidirectional ports, 1 MHz 30 mA drive I²C‑businterface, three hardware address inputs and a reset input operating between 2.3  I²C-bus to parallel port expander\n1 MHz I²C‑bus interface (Fast-mode Plus I²C-bus)\nOperating supply voltage 2.3 V to 5.5 V with 5.5 V tolerant I/Os held to VDD with 100 μA current source\n8-bit remote I/O pins that default to inputs at power-up\nLatched outputs with 25 mA sink capability directly ;

恩XP

恩智浦

Remote 8-bit I/O expander for Fm+ I2C-bus with interrupt and reset

The PCA9672 provides general-purpose remote I/O expansion via the two-wirebidirectional I²C‑bus (serial clock (SCL), serial data (SDA)).\nThe devices consist of eight quasi-bidirectional ports, 1 MHz 30 mA drive I²C‑businterface, three hardware address inputs and a reset input operating between 2.3  I²C-bus to parallel port expander\n1 MHz I²C‑bus interface (Fast-mode Plus I²C-bus)\nOperating supply voltage 2.3 V to 5.5 V with 5.5 V tolerant I/Os held to VDD with 100 μA current source\n8-bit remote I/O pins that default to inputs at power-up\nLatched outputs with 25 mA sink capability directly ;

恩XP

恩智浦

Remote 8-bit I/O expander for Fm+ I2C-bus with interrupt and reset

The PCA9672 provides general-purpose remote I/O expansion via the two-wirebidirectional I²C‑bus (serial clock (SCL), serial data (SDA)).\nThe devices consist of eight quasi-bidirectional ports, 1 MHz 30 mA drive I²C‑businterface, three hardware address inputs and a reset input operating between 2.3  I²C-bus to parallel port expander\n1 MHz I²C‑bus interface (Fast-mode Plus I²C-bus)\nOperating supply voltage 2.3 V to 5.5 V with 5.5 V tolerant I/Os held to VDD with 100 μA current source\n8-bit remote I/O pins that default to inputs at power-up\nLatched outputs with 25 mA sink capability directly ;

恩XP

恩智浦