8-bit I2C LED driver with programmable blink rates

DESCRIPTION The PCA9551 LED Blinker blinks LEDs in I2C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I2 C Master’s (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. FEATUR

文件：161.77 Kbytes 页数：21 Pages

PHI

飞利浦

I2C Demonstration Board 2005-1 Quick Start Guide

文件：268.36 Kbytes 页数：12 Pages

PHI

飞利浦

8-bit I2C-bus LED driver with programmable blink rates

文件：164.43 Kbytes 页数：26 Pages

恩XP

8-bit I2C-bus LED driver with programmable blink rates

文件：164.43 Kbytes 页数：26 Pages

恩XP

8-bit I2C-bus LED driver with programmable blink rates

文件：164.43 Kbytes 页数：26 Pages

恩XP

8-bit I²C-bus LED driver with programmable blink rates

The PCA9551 LED blinker blinks LEDs in I²C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I²C-bus master's (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs using norma • 8 LED drivers (on, off, flashing at a programmable rate)\n• 2 selectable, fully programmable blink rates (frequency and duty cycle) between 0.148 Hz and 38 Hz (6.74 seconds and 0.026 seconds)\n• Input/outputs not used as LED drivers can be used as regular GPIOs\n• Internal oscillator requires no e;

恩XP

恩智浦