PCA9543PW中文资料飞利浦数据手册PDF规格书

DESCRIPTION

The PCA9543 is a bi-directional translating switch, controlled by the I2C-bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Any individual SCx/SDx channels or combination of channels can be selected, determined by the contents of the programmable control register. Two interrupt inputs, INT0 to INT3, one for each of the downstream pairs, are provided. One interrupt output INT, which acts as an AND of the two interrupt inputs, is provided.

FEATURES

• 1-of-2 bi-directional translating switches

• I2C interface logic; compatible with SMBus standards

• 2 Active LOW Interrupt Inputs

• Active LOW Interrupt Output

• Active LOW Reset Input

• 2 address pins allowing up to 4 devices on the I2C-bus

• Channel selection via I2C-bus, in any combination

• Power up with all switch channels deselected

• Low RdsON switches

• Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

• No glitch on power-up

• Supports hot insertion

• Low stand-by current

• Operating power supply voltage range of 2.3 V to 5.5 V

• 5 V tolerant Inputs

• 0 kHz to 400 kHz clock frequency

• ESD protection exceeds 2000 V HBM per JESD22-A114, 150 V MM per JESD22-A115 and 1000 V per JESD22-C101

• Latchup testing is done to JESDEC Standard JESD78 which exceeds 100 mA

• Packages offered: SO14, TSSOP14