PCA9538APW中文资料恩XP数据手册PDF规格书

General description

The PCA9538A is a low-voltage 8-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications. NXP I/O expanders provide a simple solution when additional I/Os are needed while keeping interconnections to a minimum, for example, in ACPIpower switches, sensors, push buttons, LEDs, fan control, etc.

In addition to providing a flexible set of GPIOs, the wide VDDrange of 1.65 V to 5.5 V allows the PCA9538A to interface with next-generation microprocessors and microcontrollers where supply levels are dropping down to conserve power.

The PCA9538A contains the PCA9538A register set of four 8-bit Configuration, Input, Output, and Polarity Inversion registers.

Features and benefits

 I2C-bus to parallel port expander

 Operating power supply voltage range of 1.65 V to 5.5 V

 Low standby current consumption:

1.5A (typical at 5 V VDD)

 1.0A (typical at 3.3 V VDD)

 Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

Vhys=0.10VDD(typical)

 5 V tolerant I/Os

 Active LOW reset input (RESET)

 Open-drain active LOW interrupt output (INT)

 400 kHz Fast-mode I2C-bus

 Internal power-on reset

 Power-up with all channels configured as inputs

 No glitch on power-up

 Latched outputs with 25 mA drive maximum capability for directly driving LEDs

 Latch-up performance exceeds 100 mA per JESD78, Class II

 ESD protection exceeds JESD22

2000 V Human Body Model (A114-A)

 1000 V Charged-Device Model (C101)

 Packages offered: TSSOP16 and HVQFN16