Low-voltage 16-bit I2C-bus I/O port with interrupt

General description The PCA9535A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications. 恩XP I/O expanders provide a simple solution when additional I/Os are needed while keeping interconnections to a minimum, for example, in A

文件：2.39791 Mbytes 页数：38 Pages

恩XP

Smart, simple solutions for the 12 most common design concerns

文件：727.81 Kbytes 页数：8 Pages

恩XP

Low-voltage 16-bit I2C-bus I/O port with interrupt

General description The PCA9535A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications. 恩XP I/O expanders provide a simple solution when additional I/Os are needed while keeping interconnections to a minimum, for example, in A

文件：2.39791 Mbytes 页数：38 Pages

恩XP

Low-voltage 16-bit I2C-bus I/O port with interrupt

General description The PCA9535A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications. 恩XP I/O expanders provide a simple solution when additional I/Os are needed while keeping interconnections to a minimum, for example, in A

文件：2.39791 Mbytes 页数：38 Pages

恩XP

Low-voltage 16-bit I2C-bus I/O port with interrupt

The PCA9535A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expanderwith interrupt and reset for I²C-bus/SMBus applications. 恩XP I/O expanders provide asimple solution when additional I/Os are needed while keeping interconnections to aminimum, for example, in ACPI power switches, sensor I²C-bus to parallel port expander\nPin and function compatible with PCA9535\nOperating power supply voltage range of 1.65 V to 5.5 V\nLow standby current consumption:1.5 μA (typical at 5 V VDD)\n1.0 μA (typical at 3.3 V VDD)\nSchmitt-trigger action allows slow input transition and better switching n;

恩XP

Low-voltage 16-bit I2C-bus I/O port with interrupt

The PCA9535A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expanderwith interrupt and reset for I²C-bus/SMBus applications. 恩XP I/O expanders provide asimple solution when additional I/Os are needed while keeping interconnections to aminimum, for example, in ACPI power switches, sensor I²C-bus to parallel port expander\nPin and function compatible with PCA9535\nOperating power supply voltage range of 1.65 V to 5.5 V\nLow standby current consumption:1.5 μA (typical at 5 V VDD)\n1.0 μA (typical at 3.3 V VDD)\nSchmitt-trigger action allows slow input transition and better switching n;

恩XP